Coated Electrode
Mostrando 1-12 de 43 artigos, teses e dissertações.
-
1. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
2. A New Electrochemical Platform Based on a Polyurethane Composite Electrode Modified with Magnetic Nanoparticles Coated with Molecularly Imprinted Polymer for the Determination of Estradiol Valerate in Different Matrices
A polyurethane composite electrode modified with magnetic nanoparticles (mag; Fe3O4) coated with molecularly imprinted polymers (MIPs) was developed for the electrochemical determination of estradiol valerate. Chemical and morphological analyses of the mag-MIP were performed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (E
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
3. Microstructural Evolution Due to One Thermal Cycle in a Superduplex Stainless Steel ASTM A890/A890M - Grade 6A in the As-Weld and Post-Weld Heat Treatment Conditions
During welding of the superduplex stainless steels are exposed to thermal cycles, allowing precipitation of deleterious phases as well as unbalance as the ferrite and austenite phases. This work analyzed the microstructural changes taking place on a plate ASTM A890/A890M - grade 6A steel submitted to arc welding one welding of pass conducted on a flat surfac
Mat. Res.. Publicado em: 08/08/2019
-
4. Performance and Surface Integrity of Wire Electrical Discharge Machining of Thin Ti6al4v Plate Using Coated and Uncoated Wires
Wire Electrical Discharge Machining (WEDM) is one of the most important production technologies to manufacture very accurate small components and tools on any electrical conductive material. Titanium and its alloys have been widely used in automobile and aerospace industry as well as in medical engineering field. Small components and tools with complex geome
Mat. Res.. Publicado em: 03/06/2019
-
5. New Synthesis Method for a Core-Shell Composite Based on α-Bi2O3 @PPy and its Electrochemical Behavior as Supercapacitor Electrode
New composite based on polypyrrole (PPy) and bismuth oxide (α-Bi2O3) was investigated as supercapacitor electrode. The α-Bi2O3 was obtained by hydrothermal route at 500 ºC for 2 h. Cyclic voltammetry was used to electropolymerize PPy on graphite electrode (GE) or on GE/α-Bi2O3. The X-ray diffraction profile of Bi2O3 revealed the α-Bi2O3 monoclinic struc
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
6. Corrosion Mechanism Suggested Based on Electrochemical Analysis and SVET for Uncoated Tinplate and Post Coated With a Hybrid Film
The tinplate, used in the packaging sector and formed from a metal substrate, comprises a steel base which has undergone a surface treatment to produce a thin layer of FeSn2, a tin layer and an oxide tin layer. Currently, packaging using surface treatment is based on the use of chromates because these metals provide an excellent corrosion resistance. Nontoxi
Mat. Res.. Publicado em: 09/10/2017
-
7. Optimization of spin-coated electrodes for electrolyte-supported solid oxide fuel cells
ABSTRACT Electrodes for electrolyte-supported solid oxide fuel cells (SOFC's) were fabricated by spin coating. Strontium-doped lanthanum manganite (LSM) cathode and nickel yttria-stabilized zirconia cermet anodes were synthesized and processed for enhanced deposition conditions. The influence of electrode microstructural parameters was investigated by a syst
Matéria (Rio J.). Publicado em: 22/05/2017
-
8. Study of the Nanostructure Effect on Polyalkylthiophene Derivatives Films Using Impedance Spectroscopy
In this paper, devices fabricated with a diode-like structure (electrode/polymer/electrode) from spin-coated and nanostructured (Langmuir-Schaefer) films of polythiophene derivatives were characterized by impedance spectroscopy and studied by theoretical fitting to reach a better understanding of the physical processes in the devices. The materials used for
Mat. Res.. Publicado em: 20/03/2017
-
9. Evaluación del Deterioro de los Electrodos al Incrementar el Número de Pulsos del Tiempo de Soldadura en Aceros IF y HSLA Galvanizados y la Afectación de las Propiedades Mecánicas en los Puntos de Soldadura
Abstract: Resistance welding points, is the most important method in the assembly industry of unibody because of its automation, which is defined as the ability of the structure to provide adequate protection to passengers against injury from a collision, mainly depends on the mechanical performance of the weld nugget. To extend the life of vehicles produced
Soldag. insp.. Publicado em: 05/01/2017
-
10. Synthesis of Poly(Vinylferrocene) Perchlorate/Poly(3,3’-Diaminobenzidine) Modified Electrode in Dichloromethane for Electroanalysis of Hydroquinone
Poly(vinylferrocenium) perchlorate-poly(3,3’-diaminobenzidine) (PVF+ClO4–-PDAB) composite film was synthesized electrochemically for the first time on Pt disc electrode in a dichloromethane solution containing poly(vinylferrocene) (PVF) polymer, 3,3’-diaminobenzidine (DAB) monomer and tetrabutylammonium perchlorate as supporting electrolyte. This modif
J. Braz. Chem. Soc.. Publicado em: 2015-09
-
11. Effects from Gold Electrodes on the Electron-Phonon Coupling of Poly(p-phenylenevinylene) Films
Interface effects between metal electrodes and organic films are crucial for the overall performance of organic electronics devices. We investigate effects from gold electrodes deposited on spin-coated films of poly(p-phenylene vinylene) (PPV). While a thin Au layer (16 nm) did not affect the absorption and emission spectra of PPV, a 64 nm thick Au layer ind
J. Braz. Chem. Soc.. Publicado em: 2015-09
-
12. Corrosion resistance of 2024 aluminum alloy coated with plasma deposited a-C:H:Si:O films
AA 2024 aluminum alloy is widely employed in aeronautic and automobilist industries. Its hardness and low density are attractive properties for such industrial areas. However, since it contains copper, it undergoes severe corrosion in aggressive media as saline or low Earth orbit environments. In this work, it was investigated the properties of films deposit
Mat. Res.. Publicado em: 2014-12