Coalescence
Mostrando 1-12 de 164 artigos, teses e dissertações.
-
1. STUDY OF PARAMETERS AFFECTING THE COALESCENCE OF DIMETHYL DISULFIDE DROPS IN A MEROX UNIT
Abstract This study focuses on the coalescence of dimethyl disulfide drops with the mother phase at a flat aqueous-organic interface between dimethyl disulfide and different sodium hydroxide solutions. Drop coalescence is an important part of the Merox process for regenerating the solvent. A digital high-frame rate camera was used for recording drops coalesc
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
RESUMO O processo de furação por escoamento produz buchas para uniões removíveis que podem ser roscadas pelo processo de rosqueamento por conformação, reduzindo etapas da produção de componentes da indústria automobilística e em galpões da construção civil. Aços de alta resistência e baixa liga (ARBL) são empregados em variadas aplicações n
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Toughening of bio-PE upon addition of PCL and PEgAA
Abstract Researches of polymer blends based on biological and biodegradable polymers appear as a viable alternative to develop environmentally friendly materials. Therefore, the aim of this research was to produce compounds made with biological polyethylene, i.e., Biopolyethylene, Bio-PE, added to the biodegradable Polycaprolactone (PCL) and functionalized b
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
4. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
ABSTRACT Flow drilling process produces bushes for removable joints that can be threaded by forming tapping process, reducing stages in production of components of automobile industry and in construction sheds. High strength and low alloy steels (HSLA) are employed on several applications in the processing industry. Benefits provided by these materials make
Matéria (Rio J.). Publicado em: 10/06/2019
-
5. Compatibility and characterization of Bio-PE/PCL blends
Abstract In this work, blends based on environmentally friend polymers such as Biopolyethylene (Bio-PE), Polycaprolactone (PCL) and Polyethylene graft maleic anhydride (PEgMA) added as compatibilizer agent were produced by conventional extrusion, aiming to produce bio-blends with synergic properties at low processing cost, being at same time non-polluting an
Polímeros. Publicado em: 10/06/2019
-
6. Tayloring PS/PCL blends: characteristics of processing and properties
Abstract Blends of Polystyrene (PS) and Poly(ε-caprolactone) (PCL) were twin screw extruded, two PSs, with low and high melt flow rate (MFR) were used and their feasibility within PCL investigated by means of torque rheometry, mechanical tests, heat deflection temperature (HDT) and scanning electron microscopy (SEM); predictive models were utilized to evalu
REM, Int. Eng. J.. Publicado em: 2019-03
-
7. COD removal from sucrose solution using hydrodynamic cavitation and hydrogen peroxide: a comparison between Venturi device and orifice plate
RESUMO O objetivo deste estudo foi comparar a eficiência de remoção de DQO de um Venturi e de uma placa de orifício. Adicionalmente, a otimização da pressão de entrada dos dispositivos, o estudo da cinética da degradação, e o efeito sinérgico resultante da combinação da cavitação e H2O2 foram realizados. Um aparato experimental em escala labo
RBRH. Publicado em: 28/02/2019
-
8. Influencia del tiempo de revenido a 780°C sobre la resistencia al creep del acero ASTM A335 P91
ABSTRACT It has been investigated the effect of tempering time at 780°C on the creep strength of ASTM A335 grade P91 steel. The tempering temperature corresponded to the industrial tempering temperature and the times evaluated were chosen in such a way to accumulate, between the tempering prior as received (40 min) and the treatment carried out in the labor
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Comportamiento frente a la corrosión de uniones soldadas por fricción agitación de AA7075-T651: Evaluación galvánica
ABSTRACT Friction Stir Welding (FSW) is a novel solid-phase welding process, which has proved to have a great potential for the realization of welded joints in materials with poor weldability such as heat-treatable aluminum alloys. The aerospace industry has incorporated this process for the manufacture of structural elements, using known high strength alloy
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Efecto de la sustitución de V por Ti sobre las temperaturas de transformación de fase y el desajuste de red matriz/precipitado en la superaleación 76Fe-12Al-12V
ABSTRACT Fe-Al based alloys have a remarkable potential for high temperature structural applications, provided that the limitation of their low creep resistance is solved. Third element addition (Nb, Ti, Zr or Ta) has proven to per-form the task, at the expense of a low ductility. In previous works we have investigated ferritic alloys in the Fe-Al-V system w
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Fracture Behavior and Fatigue Performance of Inconel 625
Inconel 625 is a nickel-based highly-resistant superalloy widely used in aerospace components, in the nuclear industry, and especially in the maritime industry. Materials such as Inconel 625 have been widely used in oil exploration of Brazilian pre-salt layers due to their excellent resistance to corrosion under tension, pitting and crevice corrosion by chlo
Mat. Res.. Publicado em: 25/06/2018
-
12. Microstructure Evolution and Creep Properties of 2.25Cr-1Mo Ferrite-Pearlite and Ferrite-bainite Steels After Exposure to Elevated Temperatures
2.25Cr-1Mo steels are widely used in thermoelectric power plants. Under operational temperatures, their properties degrade due to microstructural changes related to carbide coalescence and stoichiometric transformations. The extent of such microstructural changes is controlled by stress, temperature and time. Therefore, these factors can be used to evaluate
Mat. Res.. Publicado em: 26/01/2017