Chip Formation
Mostrando 1-12 de 40 artigos, teses e dissertações.
-
1. Investigation of High-Speed Cryogenic Machining Based on Finite Element Approach
Abstract The simulation of cryogenic machining process because of using a three-dimensional model and high process duration time in the finite element method, have been studied rarely. In this study, to overcome this limitation, a 2.5D finite element model using the commercial finite element software ABAQUS has been developed for the cryogenic machining proc
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
2. Influence of graphite particles on surface roughness and chip formation studies in turning metal matrix composites
This study presents an experimental investigation on surface roughness and chip formation in turning of Al 2219/15SiCp and Al 2219/15SiCp-3Gr (hybrid) composites. Experiments were conducted with different cutting conditions using carbide, coated carbide and polycrystalline diamond (PCD) tools. The results reveal that the surface roughness values are less for
Mat. Res.. Publicado em: 25/06/2013
-
3. Design of a computer aided quick-stop device for study of dead metal zone formation
The use of quick-stop device allows observing a sequence of frozen images focused on the chip formation area when machining in orthogonal turning tests. This work records the development of a quick-stop device employing a servo motor. The present invention relates generally to a quick stop device, for combination with a cutting machine that is able to abrupt
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-12
-
4. Effects of milling condition on the surface integrity of hot forged steel
This paper presents a study on the influence of milling condition on workpiece surface integrity focusing on hardness and roughness. The experimental work was carried out on a CNC machining center considering roughing and finishing operations. A 25 mm diameter endmill with two cemented carbide inserts coated with TiN layer were used for end milling operation
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-03
-
5. Camu-camu arbustivo (Myrciaria dubia) e camu-camu arbóreo (M. floribunda): enxertia intraespecífica e interespecífica
The camu-camu (Myrciaria dubia (H.B.K.) McVaugh) is a shrubby indigenous fruit species found in the floodplains of Amazonia. The species is commonly propagated by seeds, and consequently shows considerable variation in age of bearing, production cycle, fruit yields and Vitamin C contents. Myrciaria floribunda (West ex Willd.) O. Berg is a small tree that occ
Publicado em: 2009
-
6. Experimental inquiry on chip formation in the machining of ABNT 1045 steel and nodular casting iron / Investigação experimental da formação do cavaco na usinagem do aço ABNT 1045 e do ferro fundido nodular
The chip formation is influenced by several cut parameters which also affect the forces, tensions, powers and temperatures generated during the machining process. Although they have been studied for more than 100 years, still today, the involved mechanisms of deformation are not totally know, due to the fact that the chip formation involves high temperatures
Publicado em: 2008
-
7. Influence of the tool edge geometry on specific cutting energy at high-speed cutting
This paper presents specific cutting energy measurements as a function of the cutting speed and tool cutting edge geometry. The experimental work was carried out on a vertical CNC machining center with 7,500 rpm spindle rotation and 7.5 kW power. Hardened steels ASTM H13 (50 HRC) were machined at conventional cutting speed and high-speed cutting (HSC). TiN c
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2007-09
-
8. N. Machinability of low carbon free-machining leaded steel ABNT 12L14 with different levels of residual elements (chromium, nickel and cooper) / Usinabilidade do aço de corte-fácil baixo carbono ao chumbo ABNT 12L14 com diferentes níveis de elementos químicos residuais (cromo, níquel e cobre)
The purpose of this thesis was to study the machinability of low carbon free-machining leaded steel (ABNT/AISI 12L14) with different levels of residual (tramp) elements such as chromium, nickel and copper. Nine batches of steel were produced with controlled chemical composition, and with alterations in the mentioned residual levels so as to apply two levels
Publicado em: 2007
-
9. Estudo da geometria de arestas de corte aplicadas em usinagem com altas velocidades de corte / Study of cutting edge geometry applied in high speed machining
This thesis presents an experimental study about the specific cutting energy and its relation with cutting parameters, geometrical and tribological characteristics of tools, and workpiece material. Depth of cut, cutting speed, tool nose radius, chip-breaker geometry, tool coating, hardness, microstructure and chemical composition of the workpiece material ar
Publicado em: 2005
-
10. Experimental evaluation of cutting force parameters applying mechanistic model in orthogonal milling
There have been considerable efforts in research to understand the basics of chip formation. Models developed for turning and adapted to milling, yield reasonable results, except in some particular applications. This work develops an experimental method capable of providing cutting data in a fast and reliable way to evaluate the specific cutting presure(Ks),
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2003-09
-
11. On the numerical simulation of machining processes
Numerical simulation of machining processes can be traced back to the early seventies when finite element models for continuous chip formation were proposed. The advent of fast computers and development of new techniques to model large plastic deformations have favoured machining simulation. Relevant aspects of finite element simulation of machining processe
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2000
-
12. Influência do ângulo de posição secundário da ferramenta, raio de ponta e lubrificação na usinagem em presença de aresta postiça de corte / Influence of tool end cutting edge angle, Tool nose radius and lubrication in machining under built-up edge conditions
This work investigates the influence of tool end cutting edge angle and tool nose radius on surface finish of AISI 1045 steel machined under built-up edge conditions. Surface roughness was evaluated measuring the Ra parameter and analysis of the geometry of the machined surface was carried out in the scanning electron microscope. To assist this work, the thr
Publicado em: 2000