Characterization Thermal
Mostrando 1-12 de 743 artigos, teses e dissertações.
-
1. Thermal characterization of soil-cement bricks using mining tailings
Abstract Soil-cement bricks are earth construction materials that have been gaining prominence due to their environmental advantages. The Brazilian Technical Standard NBR 8491 establishes physical and mechanical procedures to characterize these bricks. However, the thermal characterization is an important assessment, since it is related to the building’s t
REM - International Engineering Journal. Publicado em: 2022
-
2. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
3. Thermal treatment of poultry litter: Part I. Characterization by immediate analysis and gravimetric yield
RESUMO A produção de biocarvão a partir de cama de aviário por meio de pirólise lenta é uma abordagem de valor agregado baseada na fazenda para reciclar o resíduo orgânico. Os experimentos foram conduzidos para examinar como os tratamentos térmicos afetaram a composição final do material carbonizado e pirolisado em relação à análise imediata e
Revista Brasileira de Engenharia Agrícola e Ambiental. Publicado em: 2022
-
4. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
5. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
6. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
7. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
8. Blue Glow Sticks: Cinnamic Acids and Arylacrylonitriles with Liquid-Crystalline Properties and Highly Fluorescent
Five new π-conjugated chromophores derived from acrylic acid and acrylonitrile were synthesized and their thermal and photophysical behaviors were analyzed. They were designed and synthesized through Knoevenagel condensations between arylacetylenebenzaldehydes and a methylene group activated from cyanoacetic and malonic acids. The characterization of the ta
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
9. CHARACTERIZATION OF THE THERMAL ENVIRONMENT IN BROILER HOUSES WITH DIFFERENT CLIMATE CONTROL SYSTEMS
ABSTRACT The environment control of broiler houses must be done adequately to provide good thermal conditions to broilers without wasting energy. The objective of this study was to characterize the thermal environment in two mechanically ventilated broiler houses with a negative pressure ventilation system, one with a cellulose pad evaporative cooling system
Eng. Agríc.. Publicado em: 2020-10
-
10. Kinetic characterization, thermal and pH inactivation study of peroxidase and pectin methylesterase from tomato (Solanum betaceum)
Abstract Peroxidase (POD) and pectin methylesterase (PME) from tomato were characterized, studied thermal stability, and analyzed the synergistic effect of temperature and pH. For POD, the optimal activity, using H2O2 as substrate and ABTS+• as the donor H+, was obtained at pH 3.5, and for PME, the optimal activity using pectin as substrate was obtained at
Food Sci. Technol. Publicado em: 2020-06
-
11. Pyrolysis of the Caupi Bean Pod (Vigna unguiculata): Characterization of Biomass and Bio-Oil
The use of agricultural residues for the production of bio-oil is an important alternative to the use of fossil fuels. In this study, the Caupi bean pod (Vigna unguiculata) was characterized and used as biomass in the production of bio-oil. This biomass was evaluated in terms of physicochemical, morphological (scanning electron microscopy (SEM)), and thermal
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
12. Characterization of hydrolysates of collagen from mechanically separated chicken meat residue
Abstract Obtaining collagen and hydrolysates from mechanically separated chicken meat residue is an excellent way to add value to this waste. The aims of this study were to obtain collagen hydrolysates from chicken MSM residue using Alcalase® and Flavourzyme® enzymes, as well characterizing the functional, structural and thermal stability properties. The h
Food Sci. Technol. Publicado em: 2020-06