Cerium
Mostrando 1-12 de 100 artigos, teses e dissertações.
-
1. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Nickel-Cerium Layered Double Hydroxide as Electrocatalyst for Glycerol Oxidation
A new nickel based layered double hydroxide nanomaterial, Ni0.8Ce0.2-LDH, constituted by about 3 nm large nanoparticles exhibiting enhanced electrocatalytic properties towards oxidation of glycerol in alkaline media, was prepared by incorporation of 20 wt.% of CeIII ions into α-nickel hydroxide. This can be oxidized to CeIV, as demonstrated by X-ray photoel
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
3. An Alternative Spectrophotometric Determination of Carbaryl Insecticide Residues in Water Samples Using the Cerium-Catalyzed Belousov-Zhabotinsky Oscillating Reaction
An alternative approach for carbaryl determination based on the change in the oscillation period of the Belousov-Zhabotinsky (BZ) reaction under the addition of carbaryl is demonstrated. The oscillations were observed by spectrophotometric measurement at 320 nm, corresponding to the maximum absorption wavelength of cerium(IV) catalyst. The oscillation period
J. Braz. Chem. Soc.. Publicado em: 2020-05
-
4. Solvothermal Synthesis of Cerium-Doped Titania Nanostructured Materials Modified with Acetylacetone for Solar-Driven Photocatalysis
This study reports the preparation of nanostructured cerium-doped titanium dioxide photocatalysts containing different cerium concentrations by a modified sol-gel route involving the use of acetylacetone. The nanocrystalline powders had their structural, morphological, and optical properties characterized by X-ray diffraction, vibrational and Raman spectrosc
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
5. Biosynthesis and Functionalization of Bacterial Cellulose Membranes with Cerium Nitrate and Silver Nanoparticles
This work aimed to synthesize bacterial cellulose (BC) membranes functionalized with Ce(NO3)3 and silver nanoparticles (AgNPs) heat-treated in oven and autoclave. The AgNPs were characterized by TEM and the membranes were characterized by their rehydration capacity, Thermogravimetric Analysis (TGA), Scanning Electron Microscopy with Dispersive Energy Spectro
Mat. Res.. Publicado em: 28/11/2019
-
6. Glass-ceramic produced with recycled glass
ABSTRACT The objective of this work is the production and characterization of glass-ceramic with recycled glass powder and 4% (w/w) of cerium dioxide. Eleven groups were defined with conformation pressure of 11.6 and 25.8 MPa, and cerium dioxide addition. The sintering temperatures of 650, 675, 700 and 750 °C were used. The raw material was formed into a mo
Matéria (Rio J.). Publicado em: 25/11/2019
-
7. Avaliação da resistência à corrosão do filme de silanoviniltrimetoxisilano modificado com íons Ce (III) e Ce (IV) como pré-tratamento do aço carbono
RESUMO Silanos são compostos organo funcionais utilizados como agentes de acoplamentos entre interfaces orgânicoinorgânicas, com boas propriedades de adesão. Por esta razão, o uso de silanos como pré-tratamento para aços, vem ganhando espaço já que também são geradores de resíduos de menor toxidade ao meio ambiente e à saúde humana. Para melhor
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. BIOTECHNOLOGICAL APPLICATION OF SURFACE MODIFIED CERIUM OXIDE NANOPARTICLES
ABSTRACT Re-engineering of chemical materials at the nanoscale level that employ modification and improvement in their physical and chemical properties has been constantly pursued for application in biomedical and biotechnology industries. Moreover, immobilization of catalysts on these bio/chemically modified nanomaterials improved the performance of enzymes
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
9. Characterization of CBD-CdS Doped with Some Rare Earths III (Eu3+,Ce3+) as Function of Synthesis Time
Rare earths (Europium, cerium)-doped CdS nanofilms are prepared using the growth technique chemical bath deposition (CBD) at the reservoir temperature of 70±2°C varying the synthesis time in a wide range. For the rare earths doped CdS nanofilms the synthesis time was ranged from 80 to 135 min. The rare earths molar concentration was in the range 0.0≤x≤
Mat. Res.. Publicado em: 01/02/2018
-
10. Study of NiO-GDC material produced by aqueous tape casting
ABSTRACT Studies have been developed in last decades in order to produce NiO-based material to be used as anode in solid oxide fuel cell (SOFC). Aqueous-based tape casting was used to produce NiO-GDC substrates with smooth and homogeneous surfaces and good flexibility. Physical and mechanical properties were obtained in green tapes sintered at temperatures r
Matéria (Rio J.). Publicado em: 08/01/2018
-
11. Ce/kaolin clay as an active catalyst for fatty acid methyl esters production from cottonseed oil in a new integrated apparatus
Abstract An efficient solid acid catalyst (Ce/Kaolin clay) was prepared and investigated for transesterification of cottonseed oil to fatty acid methyl esters (FAME). The catalysts were characterized by XRD, BET, and NH3-TPD measurements. A new integrated apparatus for extraction and transesterification of cottonseed oil was developed. The effects of cerium
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
12. Effect of concentrations of plasticizers on the sol-gel properties developed from alkoxides precursors
Abstract Coatings developed through sol-gel method is presented as an interesting replacement to chromium coating. Sol-gel method present advantages as high purity and excellent distribution of the components. The objective of this work is to synthesize and characterize a film obtained by sol-gel route. The film was prepared with 3-(trimethoxysilylpropyl) me
Polímeros. Publicado em: 2017-12