Ceramics
Mostrando 13-24 de 555 artigos, teses e dissertações.
-
13. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03
-
14. Serpentinites: Mineral Structure, Properties and Technological Applications
Serpentine is a versatile mineral family rich in Mg silicate with several polymorphic phases, mainly antigorite and lizardite, all of them with similar chemical composition (Mg3Si2O5(OH)4). Their structures are generally composed of octahedral layers rich in Mg[MgO2(OH)4]6- , attached to a tetrahedral silicate [Si2O5]2- sheet. The unique physicochemical prop
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
15. Evaluation of the Effect of the Incorporation of Blends of Fuel and Fluxing Wastes in Red Clay Ceramics
The clay samples endure the incorporation of industrial and urban wastes, which do not cause large variations in their properties if added in controlled quantities. Wastes can be classified as fuel, fluxing and property affecting wastes. The fuel wastes usually have a high amount of organic matter, that when heated cause exothermic reactions, releasing heat
Mat. Res.. Publicado em: 09/12/2019
-
16. Phase and microstructural analysis of NdTi0.8M0.2O3.4 (M = Al, Ga) microwave ceramics
ABSTRACT In this paper, we report the characterization of NdTi0.8M0.2O3.4 (M = Ga, Al) ceramics prepared via mixed oxide solid state sintering route. X-ray diffraction analysis of the samples revealed the formation of single phase for NdTi0.8Ga0.2O3.4 sample while secondary phase was formed in the case of NdTi0.8Al0.2O3.4. Microstructural analysis of the sam
Matéria (Rio J.). Publicado em: 25/11/2019
-
17. Study of Structural and Electric Properties of the PZT 52/48 Doped With Er+3
The scientific community has shown a growing interest in relating to the ferroelectric materials and it has made an effort to develop them. Among these several ferroelectric materials, we proposed to investigated Pb(ZrTi)O3 doped with distinct Er+3 concentrations. Our aim was to investigate how the erbium affects the PZT electrical properties. To determine t
Mat. Res.. Publicado em: 25/11/2019
-
18. DISPARITY IN THE GROSS PRODUCTION VALUE OF NATIVE WOOD PRODUCTS OF THE PARAÍBA MESOREGIONS, BRAZIL (1994-2017)
RESUMO Este artigo analisou a disparidade do valor bruto de produção dos produtos madeireiros do extrativismo vegetal das mesorregiões da Paraíba, Brasil, no período de 1994 a 2017. Os indicadores empregados foram: o quociente locacional (QL), o coeficiente locacional (CL), o coeficiente de redistribuição (CRED), o coeficiente de associação geográf
Rev. Árvore. Publicado em: 25/11/2019
-
19. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
RESUMO Este trabalho investigou o efeito da adição de resíduo de vidro para fabricação de cerâmica de alvenaria. Foram conformados corpos-de-prova cilíndricos de 27 mm de diâmetro por 45 mm de altura, a partir da massa padrão de uma indústria de cerâmica vermelha e outras 3 formulações (5, 10 e 20%) com incorporação de vidro, baseado em estudo
Matéria (Rio J.). Publicado em: 25/11/2019
-
20. Caracterização e aproveitamento dos resíduos de argila e argilito provenientes da extração de gipsita no município de Araripina-Brasil como matérias-primas para cerâmica vermelha
Resumo O objetivo deste trabalho foi a caracterização e o aproveitamento dos resíduos de duas argilas (B e C, coletadas em diferentes camadas do capeamento) e argilito, gerados da extração da gipsita no município de Araripina, para a aplicação em cerâmica vermelha. Foram preparados os corpos de prova cerâmicos utilizando as argilas residuais com a
Cerâmica. Publicado em: 14/11/2019
-
21. Effects of Heat Treatment and Yb 3+ Concentration on the Downconversion Emission of Er 3+ /Yb 3+ Co-Doped Transparent Silicate Glass-Ceramics
The SiO2-Al2O3-BaF2-TiO2-CaF2 transparent silicate glass-ceramics containing BaF2 nanocrystals were successfully prepared by heat treatment process through conventional melting method. Effects of heat treatment processes and Yb3+ concentration on the downconversion (DC) emission of the co-doped Er3+/Yb3+ transparent silicate glass-ceramics were investigated.
Mat. Res.. Publicado em: 28/10/2019
-
22. Digital smile designing, pressing and stratifying ceramic lithium disilicate veneers to rehabilitate dental agenesis: a clinical report
RESUMO Este é um relato de caso de reabilitação estética anterior com facetas laminadas dos elementos 14 ao 24 confeccionadas com a cerâmica IPSE.max Ceram (Ivoclar -Vivadent), as quais substituíram facetas de resina composta insatisfatórias dos elementos 13 ao 23. Ressalta-se que o paciente possuía agenesia dos elementos 12 e 22, tornando-se necess�
RGO, Rev. Gaúch. Odontol.. Publicado em: 28/10/2019
-
23. Bond strengths of various resin cements to different ceramics
Abstract This study evaluates the shear bond strength (SBS) of various resin cements to different ceramics. Composite resin cylinders of Z100 were fabricated and cemented to disks of feldspathic ceramic (Creation), leucite-reinforced feldspathic ceramic (Empress I), and densely sintered aluminum oxide ceramic (Procera AllCeram) using five resin cements: Pana
Braz. oral res.. Publicado em: 14/10/2019
-
24. Influence of Pre-Heating Regular Resin Composites and Flowable Composites on Luting Ceramic Veneers with Different Thicknesses
Resumo O objetivo neste estudo foi avaliar a influência do pré-aquecimento, conteúdo de carga e espessura da cerâmica na espessura da película, resistência de união ao microcisalhamento, grau de conversão e alteração de cor na cimentação de cerâmicas. Dois compósitos experimentais foram preparados (Bis-GMA / UDMA / BisEMA / TEGDMA), com diferen
Braz. Dent. J.. Publicado em: 07/10/2019