Ceramic Waste
Mostrando 13-24 de 79 artigos, teses e dissertações.
-
13. Avaliação do potencial reativo de adições de resíduos de blocos de cerâmica vermelha e de concreto cominuído de RCD em matriz cimentícia
Resumo Neste trabalho avaliou-se o potencial reativo de adições de resíduo de cerâmica vermelha (RCV) e de concreto de RCD, além de fíler calcário para referência. Avaliou-se o potencial pozolânico das adições por índice de atividade pozolânica (IAP) com cal, índice de desempenho (ID) com cimento, teor de hidróxido de cálcio fixado no Chapell
Cerâmica. Publicado em: 15/08/2019
-
14. Evaluation of Solid Waste From H2S Removal Process in Natural Gas Treatment Incorporated Into Red Ceramic
Waste incorporation into clay ceramic is a worldwide accepted recycling procedure for environmentally friendly reuse of spent industrial materials. In the present work a clay ceramic from the city of Campos dos Goytacazes, Brazil, was, for the first time, investigated with different amounts, up to 10 wt%, of a solid waste generated from the “Sulfatreat”
Mat. Res.. Publicado em: 12/08/2019
-
15. Development of hollow fiber membranes with alumina and waste of quartzite
The development of ceramic membranes with different geometries and compositions extends the possibilities of industrial applications, inducing advantages in terms of increased permeability, membrane area by volume module and chemical, thermal and mechanical resistance. The use of low-cost raw materials is a trend that has grown in scientific research. The ai
Mat. Res.. Publicado em: 12/08/2019
-
16. Use of Firewood Ash Waste in Electrical Siliceous Porcelain
The use of firewood ash waste for the production of electric porcelain can represent an important technological and environmental alternative for the final disposal of this abundant solid waste material. This work aims to study the effect of replacing of sodium feldspar (albite) for firewood ash waste in electrical siliceous porcelain formulation. The firewo
Mat. Res.. Publicado em: 05/08/2019
-
17. Properties of concrete manufactured with use of ceramic sanitary ware waste as aggregate
RESUMO Na fabricação do concreto, cimento (o Portland é o mais usado), água e agregados (classificados em finos e grossos), são usados. Com a utilização de inúmeras matérias-primas, a geração de resíduos é inevitável, seja na construção civil ou em outros setores, como as indústrias produtoras de materiais cerâmicos. Entre os tipos de resí
Matéria (Rio J.). Publicado em: 10/06/2019
-
18. Análise da resistência à compressão e tração de argamassa com adição de resíduo de cerâmica vermelha
RESUMO A crescente geração de resíduos resulta em uma intensa preocupação quanto à disposição final destes materiais. Os advindos da indústria de cerâmica vermelha despertaram o interesse para o uso em argamassas e concretos, pois, devido a sua composição, são capazes de gerar reação pozolânica. Neste trabalho, foram realizados testes com os
Matéria (Rio J.). Publicado em: 10/06/2019
-
19. Bond between steel and concrete made with ceramic waste aggregate
Abstract The reduction of natural resources combined with a substantial increase in the generation of solid waste in large urban centers, justifies the search for methods of reusing the construction industry waste. The ceramic industry has a high disposal rate during the manufacturing, transportation and eventual replacement of its products. In this case, re
REM, Int. Eng. J.. Publicado em: 2019-03
-
20. Caracterização da cinza de caroço de açaí residual para adição ao concreto
Resumo Os problemas ambientais são uma realidade do mundo atual e vêm associados ao crescimento urbano e populacional, com pouco ou nenhum planejamento. O setor da construção civil é um dos maiores consumidores de recursos naturais e gerador de resíduos sólidos. Assim, é interessante pensar em uma maneira de incorporar materiais que hoje são conside
Ambient. constr.. Publicado em: 2019-03
-
21. Resíduo do processo Kraft (dregs) como matéria-prima alternativa para cerâmica vermelha
Resumo Neste trabalho foi avaliada a utilização de dregs, um resíduo sólido inorgânico proveniente do processo Kraft, como matéria-prima alternativa em cerâmica vermelha. As matérias-primas foram caracterizadas por fluorescência de raios X, difração de raios X, distribuição de tamanho de partículas, análise térmica diferencial e termogravimé
Cerâmica. Publicado em: 2019-01
-
22. Cellular Ceramics Produced from Ceramic Shell: Processing and Characterization
In this work, ceramic shell (mullite source), an industrial solid waste from the lost-wax casting process, after crushing and milling steps, was used and evaluated as an alternative raw material source for the production of cellular ceramics for high temperature applications (> 1400 °C). The obtained ceramic shell powder, with particle size distribution (d5
Mat. Res.. Publicado em: 09/11/2017
-
23. Drying Contraction Assessment of Ceramic Products Produced by Extrusion or Pressing Formulated with Sheep Wool Waste
The main aim of this paper was to evaluate ceramic products containing a percentage of ash from sheep wool waste through drying linear shrinkage from a small brickyard in Bagé - RS. The ash percentages used in the formulation were 0, 5, 10, 20 and 30%. Raw materials were analyzed by Energy Dispersive X - ray Fluorescence (XRF/EDX). The methods used to shape
Mat. Res.. Publicado em: 18/05/2017
-
24. Ballistic Application of Coir Fiber Reinforced Epoxy Composite in Multilayered Armor
Multilayered armor systems (MAS) composed of relatively lighter materials with capacity to provide personal ballistic protection are being extensively investigated and used in armor vests. A typical MAS to stand high impact energy 7.62 mm bullet has a front ceramic followed by an aramid fabric laminate, such as Kevlar™. Since both the army and municipal po
Mat. Res.. Publicado em: 15/05/2017