Ceramic Processing
Mostrando 1-12 de 78 artigos, teses e dissertações.
-
1. A review on the ceramic additive manufacturing technologies and availability of equipment and materials
Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metal
Cerâmica. Publicado em: 2022
-
2. Using digital image processing and Unmanned Aerial Vehicle (UAV) for identifying ceramic cladding detachment in building facades
Resumo As ações que compõe o processo de manutenção em fachadas são orientadas pelos resultados obtidos na fase de inspeção. Algumas propostas metodológicas que visam a otimização do processo de inspeção têm sido discutidas, entre essas destacam-se as técnicas de Processamento Digital de Imagens (PDI) capturadas por Veículo Aéreo Não Tripul
Ambiente Construído. Publicado em: 2022
-
3. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
4. Unified comprehension of the kinetics of isothermal ceramic processes under field-free and resonant wave-field conditions
Abstract This paper proposes a unified comprehension of the isothermal ceramic process kinetics stemming from mesoscopic irreversible thermodynamics. Accordingly, a unified process kinetic equation (UPKE) is derived, which predicts that the global isothermal process rate of any ceramic process is, in general, nonlinearly related both to its activation energy
Cerâmica. Publicado em: 2021-03
-
5. Maximization of the use of casting sand residue in the production of fired ceramic bricks
Abstract In this study, a red ceramic was developed with the addition of sand residue from deburring and finishing processing of cast iron molds, replacing a variable fraction of the clay. The formulated masses were shaped by pressing and firing at different temperatures (850, 900 and 1000 ºC) at a heating rate of 180 ºC/h and 2-hour level. The bodies were
REM, Int. Eng. J.. Publicado em: 2020-09
-
6. PROCESSING OF A METAL CONCENTRATE FROM GROUND WASTE PRINTED CIRCUIT BOARDS IN ACIDIC MEDIA USING HYDROGEN PEROXIDE AS OXIDANT
The recovery of precious and base metals of a metal concentrate from ground waste printed circuit boards (PCBs) is described in detail. Samples were treated with NaOHaq. to remove the soldering mask. Experiments were performed in acidic medium (HF, H2SO4, CH3COOH or H3PO4) using H2O2 as oxidant. Base metals were leached in high yields (>99 wt.%) at ~40 ºC a
Quím. Nova. Publicado em: 20/07/2020
-
7. Enrichment of Copper, Lead, and Tin by Mechanical Dry Processing of Obsolete Printed Circuit Board Residues
Waste printed circuit boards (WPCB) residues were mechanically processed to concentrate their metal content aiming to reduce costs of the subsequent recovery of copper, tin, and lead. A fully dry route was proposed to avoid the generation of liquid effluents that would require additional treatment. Firstly, 10.7% of the residue was segregated by magnetic sep
Mat. Res.. Publicado em: 24/10/2019
-
8. Quantitative image of fluorescence of ceramic and resin-cement veneers
Abstract The main of the study was quantify the effect of two ceramics with two underlying resin cements on apparent fluorescence levels. Buccal surfaces of two bovine incisors were ground flat producing one enamel and one dentin substrate. The veneers were fabricated (0.5 and 1.0 mm thickness) using two ceramics (IPSe.max Press and IPSe.max Zirpress, Ivocla
Braz. oral res.. Publicado em: 09/09/2019
-
9. Thermal behavior (TG-DTA-TMA), sintering and properties of a kaolinitic clay from Buenos Aires Province, Argentina
Resumo As propriedades tecnológicas de um caulim local, considerado um potencial material industrial, foram correlacionadas com o comportamento térmico e processos de sinterização realizados por meio de uma série de análises termoquímicas. A caracterização química e mineralógica do material foi realizada, juntamente com uma simples caracterizaçã
Cerâmica. Publicado em: 06/06/2019
-
10. Influence of Processing Variables on Clay-Based Ceramic Formulations
The properties of ceramic materials and microstructural changes are dependent on the raw materials from which they are made and on the manner in which they are processed, from the composition to the established thermal treatment, heating rate, and firing temperature. In this study, the influence of some processing parameters (formulation, maturation time, an
Mat. Res.. Publicado em: 11/03/2019
-
11. Caracterização da cinza de caroço de açaí residual para adição ao concreto
Resumo Os problemas ambientais são uma realidade do mundo atual e vêm associados ao crescimento urbano e populacional, com pouco ou nenhum planejamento. O setor da construção civil é um dos maiores consumidores de recursos naturais e gerador de resíduos sólidos. Assim, é interessante pensar em uma maneira de incorporar materiais que hoje são conside
Ambient. constr.. Publicado em: 2019-03
-
12. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019