Ceramic Powder
Mostrando 1-12 de 82 artigos, teses e dissertações.
-
1. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
2. Glass-ceramic produced with recycled glass
ABSTRACT The objective of this work is the production and characterization of glass-ceramic with recycled glass powder and 4% (w/w) of cerium dioxide. Eleven groups were defined with conformation pressure of 11.6 and 25.8 MPa, and cerium dioxide addition. The sintering temperatures of 650, 675, 700 and 750 °C were used. The raw material was formed into a mo
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Acid Leaching-Based Synthesis of CdS Yellow Ceramic Pigment with Discarded Ni-Cd Batteries
There is increasing interest in the ceramic industry in the development of pigments with intense tonalities that can be produced from low-cost alternative raw materials and also can fulfill technological and environmental requirements. This work reports on the preparation and characterization of CdS yellow ceramic pigment derived from Ni-Cd batteries through
Mat. Res.. Publicado em: 14/10/2019
-
4. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Influência da incorporação da HAp e β-TCP no cimento ósseo wollastonita/brushita
RESUMO O elevado número de pacientes com problemas de saúde por doenças ósseas ou traumas tem promovido o desenvolvimento de pesquisas em biomateriais de modo a garantir uma melhor qualidade de vida. Dentre os diversos biomateriais, os cimentos ósseos poliméricos (PMMA) ou cerâmicos (fosfatos e silicatos de cálcio) destacam-se para aplicações em ci
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Avaliação do potencial reativo de adições de resíduos de blocos de cerâmica vermelha e de concreto cominuído de RCD em matriz cimentícia
Resumo Neste trabalho avaliou-se o potencial reativo de adições de resíduo de cerâmica vermelha (RCV) e de concreto de RCD, além de fíler calcário para referência. Avaliou-se o potencial pozolânico das adições por índice de atividade pozolânica (IAP) com cal, índice de desempenho (ID) com cimento, teor de hidróxido de cálcio fixado no Chapell
Cerâmica. Publicado em: 15/08/2019
-
7. Shear Strength of a typical soil from Manaus, Brazil, stabilized with ceramic residue additive
ABSTRACT The purpose of this study is to determine the geotechnical behavior of a clayey surface soil typical to the Manaus region (Amazonas, Brazil), when mixed with ceramic powder from brick residue produced by potteries located in the county of Iranduba, Amazonas, Brazil, and with residual sand (the reference mixture), commonly used in pavements in the re
Matéria (Rio J.). Publicado em: 10/06/2019
-
8. Effect of ZrB2 Particle Size on Pressureless Sintering of ZrB2 - ß-Sic Composites
ABSTRACT: Zirconium diboride is an ultra high temperature ceramic material that leads this emerging class of materials because of its distinct combination of properties, including high melting temperature (> 3000 °C) and the lowest theoretical density (6.09 g·cm-3) among the borides. This combination of properties makes ZrB2 candidate for airframe leading
J. Aerosp. Technol. Manag.. Publicado em: 03/06/2019
-
9. Densification and microstructure of Si3N4-TiN ceramic composites
Abstract Silicon nitride is a ceramic material widely used in various structural applications at high temperatures owing to its excellent combination of mechanical and thermal properties. To increase the application of Si3N4, many researches have been developed to improve its fracture toughness and processing conditions. In this study, the sintering and micr
Cerâmica. Publicado em: 2019-01
-
10. Development of a microwave absorbing material based on molybdenum-doped niobium pentoxide
Abstract This work aimed to perform the characterization of electrical properties of niobium pentoxide, Nb2O5, pure and doped with molybdenum, prepared by powder metallurgy route and to do a comparative analysis of the influence of this material when sintered in a muffle or in a microwave oven. The results showed that the doping of the niobium pentoxide with
Cerâmica. Publicado em: 2019-01
-
11. Production of Ba2AlNbO6 Ceramics and Study of their Stability in Crude Petroleum for the Conservation of Metallic Sensing Elements Used in Petroleum Extraction
In the present work niobium based complex cubic perovskite oxide Ba2AlNbO6 ceramics were produced, characterized and their stability in crude petroleum environment was studied for inert ceramic embedding used in petroleum extraction. Ba2AlNbO6 ceramic powder was prepared by means of thermo-mechanical processing. Structural characteristics of calcined materia
Mat. Res.. Publicado em: 26/07/2018
-
12. Controller for a SPS machine: a proposal PI control
ABSTRACT Temperature control is the key to effective sintering process for metal, ceramic and polymer powders. The original control temperature provides an irregular control operation process which affects the material properties due to the spacer involved in it. Furthermore, it is analyzed how the material responds to an electrical input determining a model
Matéria (Rio J.). Publicado em: 19/07/2018