Ceramic Oxides
Mostrando 1-12 de 35 artigos, teses e dissertações.
-
1. The influence of compositional variability of dimension stone residues on the properties of rustic porous ceramic tiles
Abstract This study analyzed how the compositional variability of dimension stone residues influences the characteristics of rustic porous ceramic tiles. The specimens were prepared by adding 20 wt% of dimension stone residue to the clay and sintered at 1000 °C for 1 h. The testing assays performed were physical properties and structural analysis through sc
Cerâmica. Publicado em: 2023
-
2. The Tatuí Formation as a source of raw material in the ceramic pole of Santa Gertrudes (SP)
Abstract The importance of the Santa Gertrudes Ceramic Complex (SGCC) in the ceramic market is directly associated with the high quality of the Corumbataí Formation clays used in the manufacture of its products. Although the volumetric capacity of the Corumbataí Formation is able to meet the SGCC demand for the coming years, its industries are always in se
REM, Int. Eng. J.. Publicado em: 2020-03
-
3. Síntese de perovskitas tipo LaAl1-xCrxO3 para aplicação em esmalte transparente
RESUMO No Brasil, estudos sobre pigmentos cerâmicos ainda são bastante escassos. Por esta razão, grande parte dos pigmentos consumidos pela indústria cerâmica são importados dos países europeus. Outra parte destes pigmentos são obtidos pela rota cerâmica, entretanto, esta rota de síntese resulta em pigmentos com propriedades bastante heterogêneas,
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Obtenção de ferritas de cálcio dopadas com cromo visando aplicação em esmaltes transparentes brilhante e mate
RESUMO Este trabalho tem como objetivo obter óxidos com estrutura tipo espinélio de composição CaFe1,8Cr0,2O4 pelo método gelatina, visando aplicação em esmaltes transparentes brilhantes e mate. Os pós precursores, resultantes do processo de síntese, foram calcinados a 600 °C e a 800 °C para a obtenção da fase espinélio. Os pós foram caracteri
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. Análises de dosagens de concreto asfáltico do tipo Pré Misturado a Frio (PMF) utilizando Resíduos da Construção e Demolição de obras (RCD)
RESUMO Na construção civil, um problema ambiental recorrente é a geração e disposição de Resíduos de Construção e Demolição (RCD) de obras. A utilização do RCD como agregados na composição de concreto asfáltico, do tipo Pré Misturado a Frio (PMF), torna possível a execução de pavimentos rodoviários de baixo tráfego. Diante desses fatos
Matéria (Rio J.). Publicado em: 25/11/2019
-
6. Estudo de obtenção da membrana cerâmica densa BaCeO3
RESUMO Nos últimos anos, pós cerâmicos à base de óxidos de estrutura do tipo perovskita ganharam atenção considerável devido às suas aplicações tecnológicas na área de membranas permeáveis de oxigênio. O óxido misto BaCeO3 apesenta-se como um material amplamente estudado em uma grande diversidade de aplicações, seja como materiais eletrolí
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Characterization of Niobia-alumina Deposited by the Sol-gel Process on Carbon Steel
The precursor sols of Al2O3 and mixed NbxOy/Al2O3 oxides were synthesized by the sol-gel process using acetylacetone to control the reaction kinetics of the organometallic oxides in the mixture. The layers of the precursor sols of Al2O3 and NbxOy/Al2O3 were deposited on AISI steel 1020 by manual immersion (dip coating). The lyophilized sols were characterize
Mat. Res.. Publicado em: 16/04/2018
-
8. Copper Cobalt Magnetic Ceramic Materials Characterization at Terahertz Frequencies
ABSTRACT: This study presents the complex index of refraction and the complex permittivity of a magnetic ceramic material made of copper, cobalt, and iron oxides. The index of refraction and the extinction coefficient of the CuCo-ferrite exhibit an almost frequency independent behavior and were averaged to n = 3.62 ± 0.05 and k = 0.06 ± 0.02, respectively,
J. Aerosp. Technol. Manag.. Publicado em: 2017-06
-
9. APLICAÇÃO DE ÓXIDOS DE FERRO NANOESTRUTURADOS COMO ADSORVENTES E FOTOCATALISADORES NA REMOÇÃO DE POLUENTES DE ÁGUAS RESIDUAIS
New techniques for treating wastewater, particularly the removal or degradation of organic pollutants and heavy metals, among other pollutants, have been extensively studied. The use of nanostructured iron oxides as adsorbent and photocatalyst for the removal of these contaminants has proved a promising approach, not only because of their high treatment effi
Quím. Nova. Publicado em: 2015-03
-
10. Preparation and characterization of PbTi0(3) ceramics modified by a natural mixture of rare earth oxides of xenotime
Lead titanate ceramics modified by xenotime (Xm) with nominal composition (Pb, Xm)TiO3, Xm 10 or 15 mol %, were prepared by the conventional oxide mixture technique. Xenotime is a natural mineral consisting of a mixture of rare earth oxides. Thermal, structural and electric properties were investigated through differential and gravimetric thermal analysis, X
Mat. Res.. Publicado em: 23/08/2013
-
11. ObtenÃÃo das cerÃmicas dielÃtricas BiTRWO6 (TR = Y, Gd ou Nd) por radiaÃÃo de micro-ondas e sua aplicaÃÃo em dispositivos eletrÃnicos / Obtaining Of Ceramic Dielectric BiTRWO6 (Tr = Y, Gd Or Nd) By Microwave Radiation And Its Application In Electronic Devices
The mixture heat of the metal oxides may promote the formation of ceramic materials, depending on their dielectric properties and its crystalline structure may be used with electronic components for a variety of functions in electrical circuits. Heating method is directly related to the material properties. This work aims to use a commercial microwave oven m
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/08/2012
-
12. Construção de sensores eletroquímicos utilizando como matriz materiais cerâmicos SI O IND. 2 / M IND. X O IND. Y , e materiais cerâmicos eletricamento condutores SI O IND. 2 / C/ M IND. X O IND. Y , preparados pelo processo sol-gel / Construction of electrochemical sensors using ceramic materials SI O IND. 2 / M IND. X O IND. Y and electrically conducting ceramic materials SI O IND. 2 /C/ M IND. X O IND. Y as matrix, prepared for the sol-gel process
This work describes the synthesis and characterization of three different materials: SiO2/SnO2, SiO2/SnO2/Sb2O5 and the film of Nb2O5 formed on the surface of the ceramic material SiO2/C obtained by sol-gel process and to use them as matrix in the development of electrochemical sensors. The mixed oxides, SiO2/SnO2, were synthesized using as source of SnO2, S
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/04/2012