Ceramic Analysis
Mostrando 13-24 de 298 artigos, teses e dissertações.
-
13. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
14. Elemental Composition of Particulate Matter in the Southeastern Brazilian Ceramic Pole by Synchrotron Radiation X-ray Fluorescence Technique (SR-XRF)
In the present study, the elemental content of the particulate matter PM2.5 (particulate matter with diameters lower than 2.5 µm) and PM10 (particulate matter with diameters lower than 10 µm) of the Brazilian city of Rio Claro (SP) were analyzed by synchrotron radiation X-ray fluorescence (SR-XRF) in the Brazilian Synchrotron Light Laboratory (LNLS). A fra
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
15. Effect of Suture on Mechanical Properties of Stitched Thermal Protection Sandwich
This paper investigates the tensile properties and bending performances of stitched thermal protection structure in engineering, and the effect of stitching density on mechanical properties, via a model of ceramic-aerogel stitched sandwich. With the help of ANSYS, titanium alloy bottom plate was added to the bottom surface of the thermal protection structure
Mat. Res.. Publicado em: 13/01/2020
-
16. Influence of hydrofluoric acid etching time and concentration on shear bond strength of metal brackets to ceramic surfaces
Resumo Introdução O tratamento de superfície prévio a colagem de braquetes a cerâmica com ácido fluorídrico, é indicado devido a sua capacidade de promover alterações morfológicas necessárias para a adesão. Objetivo Avaliar a resistência de união ao cisalhamento (RUC) de braquetes metálicos unidos à superfície cerâmica feldspática sob a
Rev. odontol. UNESP. Publicado em: 13/12/2019
-
17. Glass-ceramic produced with recycled glass
ABSTRACT The objective of this work is the production and characterization of glass-ceramic with recycled glass powder and 4% (w/w) of cerium dioxide. Eleven groups were defined with conformation pressure of 11.6 and 25.8 MPa, and cerium dioxide addition. The sintering temperatures of 650, 675, 700 and 750 °C were used. The raw material was formed into a mo
Matéria (Rio J.). Publicado em: 25/11/2019
-
18. Síntese de perovskitas tipo LaAl1-xCrxO3 para aplicação em esmalte transparente
RESUMO No Brasil, estudos sobre pigmentos cerâmicos ainda são bastante escassos. Por esta razão, grande parte dos pigmentos consumidos pela indústria cerâmica são importados dos países europeus. Outra parte destes pigmentos são obtidos pela rota cerâmica, entretanto, esta rota de síntese resulta em pigmentos com propriedades bastante heterogêneas,
Matéria (Rio J.). Publicado em: 25/11/2019
-
19. Síntese de pigmentos de níquel utilizando areia descartada de fundição como fonte de sílica
Resumo Sintetizaram-se pigmentos do sistema Zn2-xNixSiO4 variando a proporção molar de zinco e níquel, partindo da estrutura willemita (Zn2SiO4) à olivina (Ni2SiO4), usando areia descartada de fundição (ADF) e sílica comercial como fontes de SiO2. A ADF foi caracterizada por análise química e DRX. A síntese dos pigmentos seguiu rota cerâmica, com
Cerâmica. Publicado em: 14/11/2019
-
20. Evaluation of the Projectile's loss of Energy in Polyester Composite Reinforced with Fique Fiber and Fabric
Firearms threat has always been a matter of personal concern, especially to soldiers in armed conflicts as well as police officers and civilians involved with public security. A multilayered armor system (MAS) is intended to personal protection against high kinetic energy ammunition, such as that used in rifles. MAS layers are normally composed of a front ce
Mat. Res.. Publicado em: 21/10/2019
-
21. Different Types of Lignocellulosic Materials for Energy Generation in the Ceramic Industry
ABSTRACT This work aims at the physicochemical characterization of four species: Eucalyptus sp, Pinus sp, Citrus sinensis and Hevea brasiliensis for use in ceramic furnace. Immediate analysis, chemical analyses were carried out (total extractives, Klason lignin, holocellulose and alpha-cellulose content). Results were applied to ANOVA and Tukey for statistic
Floresta Ambient.. Publicado em: 03/10/2019
-
22. Variation of the milling conditions in the obtaining of nanocellulose from the paper sludge
ABSTRACT This work aimed to evaluate three different milling conditions, seeking the optimization of CNS isolation process. The paper sludge was chemically treated with detergent and H2O2, by two steps, to remove the noncellulosic contents (hemicellulose and lignin). After these treatments, the sample was milled with the variation of a liquid medium. The thr
Matéria (Rio J.). Publicado em: 16/09/2019
-
23. Influência da incorporação da HAp e β-TCP no cimento ósseo wollastonita/brushita
RESUMO O elevado número de pacientes com problemas de saúde por doenças ósseas ou traumas tem promovido o desenvolvimento de pesquisas em biomateriais de modo a garantir uma melhor qualidade de vida. Dentre os diversos biomateriais, os cimentos ósseos poliméricos (PMMA) ou cerâmicos (fosfatos e silicatos de cálcio) destacam-se para aplicações em ci
Matéria (Rio J.). Publicado em: 16/09/2019
-
24. Quantitative image of fluorescence of ceramic and resin-cement veneers
Abstract The main of the study was quantify the effect of two ceramics with two underlying resin cements on apparent fluorescence levels. Buccal surfaces of two bovine incisors were ground flat producing one enamel and one dentin substrate. The veneers were fabricated (0.5 and 1.0 mm thickness) using two ceramics (IPSe.max Press and IPSe.max Zirpress, Ivocla
Braz. oral res.. Publicado em: 09/09/2019