Cemented Carbide
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. Productivity and Superficial Quality of an Aspherical Die Using CAD/CAM
ABSTRACT Nowadays, it is hard to imagine modern industry without the manufacturing and design software aided by computer, known as CAD/CAM, once the search for excellence in complex geometry parts, reduced time, quality assurance and interchangeability is increasing. Within this quest, the CAD/CAM platform has become a significant factor in manufacturing, es
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey
ABSTRACT At the moment the industrially applied techniques for cemented carbide reclamation feature several deficiencies. Depending on the process route, obstacles consist in high energy and chemical consumption (indirect recycling methods) or a deterioration of the recycled product in comparison with the primary material (direct recycling approach). Therefo
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. The Effect of Cr3C2 and TaC Additives on Microstructure, Hardness and Fracture Toughness of WC-6Co Tool Material Fabricated by Spark Plasma Sintering
Spark plasma sintering has been used to successfully produce WC-6Co-xCr3C2, WC-6Co-xTaC (x = 0.2, 0.6, 1.0) and WC-6Co-xCr3C2-xTaC (x = 0.1, 0.3, 0.5) cemented carbides. The spark plasma sintered compacts were investigated by scanning electron microscopy, hardness tests and fracture toughness tests. The results were compared to an additives-free WC-6Co cemen
Mat. Res.. Publicado em: 11/05/2017
-
4. The Influence of Twist Drill Main Cutting Edge Preparation in Drilling Process
In order to improve the performance of a twist drill, one must understand some aspects involved in drilling process that are not commonly addressed, such as the micro geometry employed in the tool’s tip sharpening and the protection of the main cutting edge. The edge of the twist drill can be protected by rounding, chamfering or the combination of both. Th
Mat. Res.. Publicado em: 17/11/2015
-
5. Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent
Objective The purpose of this study was to assess the influence of conditioning methods and thermocycling on the bond strength between composite core and resin cement. Material and Methods Eighty blocks (8×8×4 mm) were prepared with core build-up composite. The cementation surface was roughened with 120-grit carbide paper and the blocks were thermocycled
J. Appl. Oral Sci.. Publicado em: 2015-02
-
6. Avaliação de diferentes ferramentas no torneamento da liga Inconel 713C / Evaluation of different tools in turning of Inconel 713C
The super alloy Inconel 713C is an alloy whose main element of its composition is nickel. The combination of high levels of this element and the structure of this material makes it very difficult to be transformed by the machining process. Because of this difficulty and lack of information about the machining of this material, the purpose of this study was t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2012
-
7. Microstructure of alumina-matrix composites reinforced with nanometric titanium and titanium carbide dispersions
The synthesis of alumina (Al2O3)-composites having different amount of very fine titanium and titanium carbide reinforcement-particles has been explored. Two experimental steps have been set for the synthesis; the first step consisted of the pressureless-sintering of Al2O3-titanium powders which were thoroughly mixed under high energy ball-milling and throug
Mat. Res.. Publicado em: 04/09/2012
-
8. Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro
This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
9. Contribuição para os usuários de sistemas CAD/CAM/CNC em operação de fresamento de topo em aço para moldes e matrizes / Contribution to the users of systems CAD/CAM/CNC in end milling operation in steel for molds and dies
The increased in the demand for plastic products and the need for reduction manufacturing times, and the growing dependence of man on the computer in present day, especially in manufacturing activities, has resulted in constant research of technological developments in order to supply these needs. In dies and molds manufacturing industry for plastic injectio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/06/2011
-
10. Effects of milling condition on the surface integrity of hot forged steel
This paper presents a study on the influence of milling condition on workpiece surface integrity focusing on hardness and roughness. The experimental work was carried out on a CNC machining center considering roughing and finishing operations. A 25 mm diameter endmill with two cemented carbide inserts coated with TiN layer were used for end milling operation
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-03
-
11. Study of Tapping Operation of Compacted Graphite Iron With Cemented Carbide Tool / Estudo do processo de rosqueamento com macho de corte de metal duro em ferro fundido vermicular
The use of compacted graphite iron - CGI is growing in the automobile industry, replacing several components that usually are manufactured in grey cast iron. However, due to its poor machinability when compared to grey cast iron, the production cost sometimes is not competitive. Several research about machinability of CGI has already been developed, mainly i
Publicado em: 2009
-
12. Investigação sobr o uso da texturização a laser na preparação da superficie a ser recoberta em ferramentas de metal duro para fresamento / Research on the use of laser texturing for the surface preparation of to be coated carbide milling tools
Machining is one of the fundamental manufacturing processes of contemporary industry and coated cemented carbide is the most used cutting tool material. Manufacturing of this kind of tools includes the substrate surface processing previously to coating deposition in order to achieve high adhesion resistance in the substrate-coating interface. The most spread
Publicado em: 2009