Cemented Carbide Inserts
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. Productivity and Superficial Quality of an Aspherical Die Using CAD/CAM
ABSTRACT Nowadays, it is hard to imagine modern industry without the manufacturing and design software aided by computer, known as CAD/CAM, once the search for excellence in complex geometry parts, reduced time, quality assurance and interchangeability is increasing. Within this quest, the CAD/CAM platform has become a significant factor in manufacturing, es
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. The Effect of Cr3C2 and TaC Additives on Microstructure, Hardness and Fracture Toughness of WC-6Co Tool Material Fabricated by Spark Plasma Sintering
Spark plasma sintering has been used to successfully produce WC-6Co-xCr3C2, WC-6Co-xTaC (x = 0.2, 0.6, 1.0) and WC-6Co-xCr3C2-xTaC (x = 0.1, 0.3, 0.5) cemented carbides. The spark plasma sintered compacts were investigated by scanning electron microscopy, hardness tests and fracture toughness tests. The results were compared to an additives-free WC-6Co cemen
Mat. Res.. Publicado em: 11/05/2017
-
3. Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro
This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
4. Contribuição para os usuários de sistemas CAD/CAM/CNC em operação de fresamento de topo em aço para moldes e matrizes / Contribution to the users of systems CAD/CAM/CNC in end milling operation in steel for molds and dies
The increased in the demand for plastic products and the need for reduction manufacturing times, and the growing dependence of man on the computer in present day, especially in manufacturing activities, has resulted in constant research of technological developments in order to supply these needs. In dies and molds manufacturing industry for plastic injectio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/06/2011
-
5. Effects of milling condition on the surface integrity of hot forged steel
This paper presents a study on the influence of milling condition on workpiece surface integrity focusing on hardness and roughness. The experimental work was carried out on a CNC machining center considering roughing and finishing operations. A 25 mm diameter endmill with two cemented carbide inserts coated with TiN layer were used for end milling operation
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-03
-
6. Study of laser textured and coated cutting tools used in face milling of compacted graphite cast iron / Estudo da caracterização de ferramentas de corte texturizadas a laser e revestidas utilizadas no fresamento frontal de ferro fundido vermicular
The controlled alteration of a surface can improve the performance of a mechanical part. The texture is the digital impression of a surface composed of hills and cavities, normally disordered distributed. When this texture is uniform and regularly distributed on a surface, it can modify significantly the functionality of a component. A technique used to unif
Publicado em: 2009
-
7. Estudo da usinabilidade dos ferros fundidos cinzentos ligados (CrCuSn e CrCuSnMo) e vermicular classe 350 no fresamento frontal em alta velocidade de corte
Cast iron is used to manufacture engine blocks due to its mechanical and physical properties like thermal conductivity and dumpy capacity, which are fundamental to these applications. Compacted graphite iron (CGI) has higher mechanical strength compared to gray cast iron and can be a great advantage in these type of mechanical parts. The compression rate can
Publicado em: 2009
-
8. Análise do Efeito da Seqüência de Arestas e do Número de Interrupções para Medir Desgaste na Vida da Ferramenta no Torneamento / Analysis of the Effect of the Sequence of Edges and Number of Interruptions to Measure Wear on Tool Life in Turning
Especialistas em usinagem se deparam com uma questão na utilização de insertos intercambiáveis: a utilização de uma aresta do inserto afeta o desempenho das demais arestas? Alguns desses especialistas afirmam que, em ferramentas quadradas, por exemplo, a seqüência das arestas utilizadas pode afetar o resultado final do teste de vida. A justificativa
Publicado em: 2009
-
9. Analise do desgaste de ferramentas no fresamento com alta velocidade de aços endurecidos / Analysis of tool wear in high speed milling of hardened steels
Usually, the die and moulds components, which are responsible for the part forms, have complex geometries and are made of high hardness materials, what cause difficulties for their machining. High Speed Milling has become an alternative for machining these components. This work aims to broaden the performance understanding and the wear mechanisms on tools us
Publicado em: 2007
-
10. Estudo da influencia do teor de niquel na usinabilidade de ligas Fe-Cr-Ni / Study of the nickel content influence in the machinability of Fe-Cr-Ni
The aim of this work was to study the influence of nickel content in FeCrNi alloys on the coated cemented carbide tool life during the finish turning process. For this purpose 18%Cr-0,01%C-0,2%Si-0,4%Mn base composition and variable nickel content (0, 10, 20, 30, 40, 50 and 60 weight %) alloys were prepared. As the nickel content increased, the iron content
Publicado em: 2007