Cellulose
Mostrando 13-24 de 3037 artigos, teses e dissertações.
-
13. BIONANOCOMPÓSITOS POLIMÉRICOS À BASE DE MONTMORILLONITA – MATERIAIS DE INTERESSE CONTÍNUO
Polymeric bionanocomposites are versatile materials that have many practical applications. The wide use of these materials is mainly due to their structure and properties, which combine at nanometric scale, the functionality of biopolymers with the excellent stability of inorganic solids, such as the clay minerals family. Montmorillonite is the most widely e
Quím. Nova. Publicado em: 2020-12
-
14. Addressing interpersonal conflict among healthcare workers during the coronavirus pandemic
ABSTRACT The environment control of broiler houses must be done adequately to provide good thermal conditions to broilers without wasting energy. The objective of this study was to characterize the thermal environment in two mechanically ventilated broiler houses with a negative pressure ventilation system, one with a cellulose pad evaporative cooling system
Braz. J. Psychiatry. Publicado em: 2020-10
-
15. CHARACTERIZATION OF THE THERMAL ENVIRONMENT IN BROILER HOUSES WITH DIFFERENT CLIMATE CONTROL SYSTEMS
ABSTRACT The environment control of broiler houses must be done adequately to provide good thermal conditions to broilers without wasting energy. The objective of this study was to characterize the thermal environment in two mechanically ventilated broiler houses with a negative pressure ventilation system, one with a cellulose pad evaporative cooling system
Eng. Agríc.. Publicado em: 2020-10
-
16. ASPECTOS ESTRUTURAIS DE ESFERAS DE QUITOSANA/PVA RETICULADAS COM GLUTARALDEÍDO SUBMETIDAS A DIFERENTES TRATAMENTOS TÉRMICOS
Chitosan is a biopolymer derived from chitin and the most abundant polysaccharide in nature after cellulose. This biopolymer has been applied in different areas due its biodegradability and biocompatibility properties. Modifications of chitosan structure by cross-linking chemical agents can alter its physical, chemical, and morphological characteristics. The
Quím. Nova. Publicado em: 2020-09
-
17. CELLULOSE NANOFIBERS FROM CASSAVA AGRO-INDUSTRIAL WASTE AS REINFORCEMENT IN PVA FILMS
Cellulose nanofibers (CNF) have been applied in composite systems due to the abundance of raw material, excellent mechanical and thermal properties. In this work, CNF was prepared from agroindustrial waste and used in specified amounts in polyvinyl alcohol (PVA) composites. The FTIR spectra of CNF, chemically purified cellulose (CPC) and Cassava Agro-industr
Quím. Nova. Publicado em: 2020-06
-
18. Pyrolysis of the Caupi Bean Pod (Vigna unguiculata): Characterization of Biomass and Bio-Oil
The use of agricultural residues for the production of bio-oil is an important alternative to the use of fossil fuels. In this study, the Caupi bean pod (Vigna unguiculata) was characterized and used as biomass in the production of bio-oil. This biomass was evaluated in terms of physicochemical, morphological (scanning electron microscopy (SEM)), and thermal
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
19. Regenerated Cellulose Membrane from Peanut Shell for Biodiesel Purification
Biodiesel purification by water washing has been proved to be an unattractive process from an economic and environmental point of view. In this work, we propose the use of regenerated cellulose membranes from peanut shell as an alternative in the biodiesel purification. The preparation of the membranes was optimized from a central composite design, resulting
J. Braz. Chem. Soc.. Publicado em: 2020-05
-
20. USE OF PAPER SPRAY-MASS SPECTROMETRY TO DETERMINE THE CHEMICAL PROFILE OF RIPE BANANA PEEL FLOUR AND EVALUATION OF ITS PHYSICOCHEMICAL AND ANTIOXIDANT PROPERTIES
In this work, the peels of ripe banana (Musa sp.), variety “Prata”, were used to prepare a flour, which was evaluated for its physicochemical characteristics and antioxidant activity. The characterization of its chemical profile was performed by a fast and simple method: paper spray-mass spectrometry. This flour had high carbohydrate content and total di
Quím. Nova. Publicado em: 2020-05
-
21. APROVEITAMENTO DE PRECURSORES LIGNOCELULÓSICOS PARA PRODUÇÃO DE ACETATO DE CELULOSE
The feasibility of obtaining cellulose acetate from lignocellulosic precursors is of great interest from the environmental, economic and technological points of view. Herein, sugarcane bagasse and vegetable sponge (Luffa cylindrica ) were used as precursors to produce cellulose using the organosolv extraction procedure. From the extracted celluloses, the pro
Quím. Nova. Publicado em: 2020-03
-
22. EVALUATION OF POLY(VINYL ALCOHOL) ADDITION EFFECT ON NANOFIBRILLATED CELLULOSE FILMS CHARACTERISTICS
ABSTRACT In this study, based on the mechanical shear treatment, the cellulosic pulp was fibrillated in nanofibrils dispersed in aqueous suspension. Nanofibrillated Cellulose (NFC) matrix - Polyvinyl Alcohol (PVA) nanocomposite films’ were prepared by casting from NFC/PVA suspension mixtures. The thermal and mechanical properties of the obtained films were
CERNE. Publicado em: 2020-03
-
23. Postharvest 1-methylcyclopropene treatments maintain the quality of Rosa sterilis D. shi during storage
Abstract Effects of different concentrations of aqueous 1-methylcyclopropene (1-MCP) on Rosa sterilis D. shi fruits were investigated. The fruits were harvested at commercial maturity stage and treated with 1-MCP treatment at 0.5, 1.0, and 1.5 μL L-1 for 20 h at 25 °C in an air tight chamber along with control sample to evaluate the effect of 1-MCP concent
Food Sci. Technol. Publicado em: 2020-03
-
24. Optimization of ultrasound-assisted enzymatic extraction and in vitro antioxidant activities of polysaccharides extracted from the leaves of Perilla frutescens
Abstract A Box-Behnken design was employed to optimize ultrasound-assisted enzymatic extraction of polysaccharides from perilla leaves. Four independent variables, namely, liquid-to-solid ratio, enzymatic time, enzymatic temperature, and ultrasonic power were investigated. Under the optimal liquid-to-solid ratio of 41:1, enzymatic time of 40 min, enzymatic t
Food Sci. Technol. Publicado em: 2020-03