Carbon Nanotubes
Mostrando 37-48 de 298 artigos, teses e dissertações.
-
37. Harmonious interaction of incorporating CNTs and zeolitic imidazole frameworks into polysulfone to prepare high performance MMMs for CO 2 separation from humidified post combustion gases
Abstract Multi-walled carbon nanotubes (CNTs) and zeolitic imidazole frameworks (ZIF-301) were synergistically incorporated into glassy polysulfone (PSF) to prepare mixed-matrix membranes (MMMs) to separate CO2 from post combustion flue gas. The flexible MMMs rendering consistent distribution and improved adhesion of nanofillers with the polymer matrix were
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
38. Production of TiO2 Coated Multiwall Carbon Nanotubes by the Sol-Gel Technique
In recent years, efforts in developing high strength-low density materials are increasing significantly. One of the promising materials to attend this demand is the carbon nanotube (CNT), to be used mainly as a reinforcing phase in lightweight metal matrix composites (MMC). In the present work, the sol-gel technique has been employed to obtain TiO2 coating o
Mat. Res.. Publicado em: 18/12/2017
-
39. Free Vibration Analysis of Functionally Graded Nanocomposite Beams on Elastic Foundation Using a Mesh-Free Method
Abstract The use of Carbon Nanotubes as the reinforcing constituent for polymer matrix composites in place of conventional fibers has led to the emergence of a new generation of advanced composite materials. In this paper, the free vibration of functionally graded nanocomposite beams on elastic foundations are studied. Three different types of Carbon Nanotub
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
40. Layer-by-Layer technique employed to construct multitask interfaces in polymer composites
Abstract The properties of glass fiber-reinforced polymer composites are closely related to the fiber-matrix interface. Interfacial treatments to improve mechanical properties are usually limited to enhance interfacial adhesion. In this work, Layer-by-Layer (LbL) technique was introduced to build a novel interface in polymer composites. Different numbers of
Polímeros. Publicado em: 2017-12
-
41. Synthesis, Characterization and Enhanced Photocatalytic Activity of Iron Oxide/Carbon Nanotube/Ag-doped TiO2 Nanocomposites
A novel magnetically recoverable catalyst (Fe/MWCNT/TiO2-Ag) was prepared in this study by a process that involves few steps. Titanium dioxide doped with silver and iron oxide was deposited on support of multi-walled carbon nanotubes (MWCNT). The synthesized catalysts were characterized by inductively coupled plasma mass spectrometry (ICP-MS), N2 adsorption/
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
42. Hydrogen Uptake Enhancement by the Use of a Magnesium Hydride and Carbon Nanotubes Mixture
Studies show that the carbon nanotubes (CNTs) serve as hydrogen diffusion channels, when used with magnesium hydride. The hydrogen sorption study, of a MgH2 and 5wt% of multiwalled carbon nanotubes mixture, was the main purpose of this work. The samples were analyzed by means of X-ray diffraction (XRD) and also studied in a differential scanning calorimeter
Mat. Res.. Publicado em: 27/11/2017
-
43. Influence of mixing methods on the properties of high density polyethylene nanocomposites with different carbon nanoparticles
ABSTRACT In this paper, nanocomposites with multiwalled carbon nanotubes (MWCNT) or graphene nanosheets were prepared using a high density polyethylene (HDPE) matrix. Two different processes were employed: a solution method and a melt mixing method. The crystallinity index of the HDPE showed similar levels in nanocomposites after the addition of carbon nanot
Matéria (Rio J.). Publicado em: 02/10/2017
-
44. Carbon nanotube buckypaper reinforced polymer composites: a review
Abstract This review provides valuable information about the general characteristics, processing conditions and physical properties of carbon nanotube buckypaper (BP) and its polymer composites. Vacuum filtration is the most common technique used for manufacturing BP, since the carbon nanotubes are dispersed in aqueous solution with the aid of surfactant. Pr
Polímeros. Publicado em: 21/09/2017
-
45. Assessment of Percolation Threshold Simulation for Individual and Hybrid Nanocomposites of Carbon Nanotubes and Carbon Black
Modeling electrical conductivity of polymer composites with conductive fillers has great applicability to predict conductive materials behavior. In this study, the electrical behavior of simple and hybrid systems prepared from Carbon Black (CB) and Carbon Nanotubes (CNT) was studied. There have been few advances reported in the literature regarding the model
Mat. Res.. Publicado em: 18/09/2017
-
46. Effect of Electron Beam and Gamma Rays on Carbon Nanotube Yarn Structure
Individual carbon nanotubes (CNTs) exhibit excellent mechanical, electrical and thermal properties, leading to development of a new generation of advanced lightweight materials and spacecraft electronics substituting the electronics based on silicon. The direct assembly of CNTs into macroscopic fibers or sheets has been a way to overcome their dispersion and
Mat. Res.. Publicado em: 18/09/2017
-
47. Effective Synthesis of Silicon Carbide Nanotubes by Microwave Heating of Blended Silicon Dioxide and Multi-Walled Carbon Nanotube
Silicon carbide nanotube (SiCNTs) has been proven as a suitable material for wide applications in high power, elevated temperature and harsh environment. For the first time, we reported in this article an effective synthesis of SiCNTs by microwave heating of SiO2 and MWCNTs in molar ratio of 1:1, 1:3, 1:5 and 1:7. Blend of SiO2 and MWCNTs in the molar ratio
Mat. Res.. Publicado em: 18/09/2017
-
48. Polydimethylsiloxane Membranes Containing Multi-walled Carbon Nanotubes for Gas Separation
Polydimethylsiloxane (PDMS) membranes with different concentrations of multi-walled carbon nanotubes were prepared in order to evaluate their gas separation performances. Mixed matrix membranes were characterized by scanning electron microscopy, thermogravimetric analysis, Fourier transformed infrared, positron annihilation lifetime and Raman spectroscopies
Mat. Res.. Publicado em: 17/08/2017