Carbon Nanotubes
Mostrando 1-12 de 298 artigos, teses e dissertações.
-
1. Study of nanocomposites with carbon nanotubes and their tendency for carbon organization
Abstract The carbon derived from the thermal treatment of modified phenolic resins (PR) tends to organize into graphitic lamellae or turbostratic carbon and is commonly considered non-graphitizable. In this study, nanocomposites were synthesized with modified phenolic resin (Novolac) used as the matrix and oxidized multi-walled carbon nanotubes (NTox) in amo
Cerâmica. Publicado em: 2022
-
2. Dispersive Solid-Phase Extraction Using 3-Mercaptopropyltrimethoxysilane Functionalized Magnetic MWCNT-Based Nanocomposite for Selective and Efficient Preconcentration of Pb2+ with FAAS Determination
A novel nanocomposite based on magnetic multiwalled carbon nanotubes coated with SiO2 and functionalized with 3-mercaptopropyltrimethoxysilane (3-MPTMS) was prepared for the efficient extraction and quantification of lead ions from water samples. The adsorption capacity of this adsorbent could reach 1.995 mg g-1 Pb2+ in an equilibrium time of 30 min. Under o
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Tópicos Emergentes em Insuficiência Cardíaca: Terapias Intervencionistas na Insuficiência Cardíaca
In this paper a novel supramolecular strategy to improve the efficiency of a voltammetric sensor to determine two biologically relevant molecules (epinephrine (EP) and uric acid (UA)) is presented. The strategy is based on the use of a glassy carbon electrode modified with a copper(II) complex ([Cu(H2dimpy)Cl]PF6) adsorbed on multi-walled carbon nanotubes (M
Arq. Bras. Cardiol.. Publicado em: 2020-11
-
4. Synergistic Supramolecular Effect on the Electro-Oxidation of Biological Relevant Molecules: A Novel Sensor for Simultaneous Determination of Epinephrine and Uric Acid in Human Urine Using MWCNT and a Copper(II) Complex
In this paper a novel supramolecular strategy to improve the efficiency of a voltammetric sensor to determine two biologically relevant molecules (epinephrine (EP) and uric acid (UA)) is presented. The strategy is based on the use of a glassy carbon electrode modified with a copper(II) complex ([Cu(H2dimpy)Cl]PF6) adsorbed on multi-walled carbon nanotubes (M
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
5. Zinc Hexacyanoferrate/Multi-Walled Carbon Nanotubes Films for Rechargeable Aqueous Batteries
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
6. AVALIAÇÃO DE NANOTUBOS DE CARBONO FUNCIONALIZADOS VISANDO O DESENVOLVIMENTO DE MÉTODOS DE PRÉ-CONCENTRAÇÃO DE ÍONS METÁLICOS E DETERMINAÇÃO POR TÉCNICAS ESPECTROMÉTRICAS E ELETROANALÍTICAS
This review focuses on the use of functionalized carbon nanotubes (CNTs) on the development of preconcentration methods with substantial contributions on selectivity and sensitivity for metal ions determination. CNTs have been usually employed in the development of preconcentration/speciation coupled to spectroanalytical techniques for ions determination at
Quím. Nova. Publicado em: 2020-09
-
7. Tear down academic paywall during pandemic
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
Braz. J. Biol.. Publicado em: 2020-09
-
8. Evaluation of Carbon Nanotubes/Polyaniline Thin Films for Development of Electrochemical Sensors
Thin films of multiwalled carbon nanotubes/polyaniline nanocomposites (CNT/PAni) were synthesized through the liquid/liquid (L/L) interfacial route, deposited over glass substrates, and evaluated through cyclic voltammetry and amperometry as electrochemical sensor, using L-ascorbic acid as probe. Films with three different CNT/PAni ratios have been prepared.
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
9. Ab initio Study of 17α-Ethinylestradiol and Estrone Molecules Interacting with Single Wall Carbon Nanotube
In this work, a systematic study of 17α-ethinylestradiol and estrone molecules interacting with single wall carbon nanotube is presented by means of first principle calculations. The structural properties, binding energy, charge transfer, and electronic properties were calculated and analyzed to characterize the effect of interaction of 17α-ethinylestradio
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
10. Editar Machado de Assis
In this work, a systematic study of 17α-ethinylestradiol and estrone molecules interacting with single wall carbon nanotube is presented by means of first principle calculations. The structural properties, binding energy, charge transfer, and electronic properties were calculated and analyzed to characterize the effect of interaction of 17α-ethinylestradio
Machado Assis Linha. Publicado em: 2020-04
-
11. New Detector Based on Composite of Carbon Nanotubes with Nanoparticles of Cobalt Oxide for Carbohydrates Analysis by HPLC with Reverse Pulsed Amperometric Detection
This work aims to present an alternative detector for the determination of arabinose, galactose, glucose and xylose in hydrolyzed sugarcane bagasse. The detector was developed using an electrode modified with multi-walled carbon nanotubes containing cobalt oxide nanoparticles (GCE/MWCNT/CoOOH) applied in high-performance liquid chromatography (HPLC) with rev
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
12. CATALYST PREPARATION METHODS TO REDUCE CONTAMINANTS IN A HIGH-YIELD PURIFICATION PROCESS OF MULTIWALLED CARBON NANOTUBES
Abstract CoMo/MgO catalysts with low loading of cobalt and molybdenum were prepared by incipient wetness impregnation and the sol-gel method for high yield production of carbon nanotubes (CNT). A detailed characterization of the catalysts, as-produced CNT and purified CNT, indicated a relationship between carbon nanotube properties, synthesis and purificatio
Braz. J. Chem. Eng.. Publicado em: 13/01/2020