Carbon Fibers
Mostrando 13-24 de 108 artigos, teses e dissertações.
-
13. An Evaluation of the Dielectric Barrier Discharge Treatment on the Mechanical, Structural and Morphological Properties of Carbon Fibers
ABSTRACT: Carbon fibers (CFs) have been widely applied in the manufacture of polymeric composites. The mechanical properties of these composites depend on the adhesion in the matrix/CF interface. Since the CFs have poor adhesion properties, a surface treatment of the CFs becomes necessary. The plasma process used in this work was the dielectric barrier disch
J. Aerosp. Technol. Manag.. Publicado em: 29/03/2018
-
14. Layer-by-Layer technique employed to construct multitask interfaces in polymer composites
Abstract The properties of glass fiber-reinforced polymer composites are closely related to the fiber-matrix interface. Interfacial treatments to improve mechanical properties are usually limited to enhance interfacial adhesion. In this work, Layer-by-Layer (LbL) technique was introduced to build a novel interface in polymer composites. Different numbers of
Polímeros. Publicado em: 2017-12
-
15. Free Vibration Analysis of Functionally Graded Nanocomposite Beams on Elastic Foundation Using a Mesh-Free Method
Abstract The use of Carbon Nanotubes as the reinforcing constituent for polymer matrix composites in place of conventional fibers has led to the emergence of a new generation of advanced composite materials. In this paper, the free vibration of functionally graded nanocomposite beams on elastic foundations are studied. Three different types of Carbon Nanotub
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
16. Polypropylene Composites Manufactured from Recycled Carbon Fibers from Aeronautic Materials Waste
Carbon fiber composites are used in several industries such as, aerospace, automotive, civil engineering, sports goods and technical applications due to its low-weight, strength and stiffness. However, the technology of recycling of these thermosetting polymer composites remains an engineering challenge because of their cross-linked structures that impede th
Mat. Res.. Publicado em: 23/10/2017
-
17. Mechanical Characterization of Basalt and Glass Fiber Epoxy Composite Tube
The application of basalt fibers are possible in many areas thanks to its multiple and good properties. It exhibits excellent resistance to alkalis, similar to glass fiber, at a much lower cost than carbon and aramid fibers. In the present paper, a comparative study on mechanical properties of basalt and E-glass fiber composites was performed. Results of app
Mat. Res.. Publicado em: 23/10/2017
-
18. Production and Characterization of Activated Carbon Fiber from Textile PAN Fiber
ABSTRACT: This paper presents the preparation and characterization of carbon fiber felt and activated carbon fiber felt from textile polyacrylonitrile fiber. Carbon fibers are usually related to aircraft manufacturing or high mechanical purposes. Activated carbon fibers are known as excellent adsorbent materials. Despite all advantages, carbon fiber and acti
J. Aerosp. Technol. Manag.. Publicado em: 02/10/2017
-
19. Application of Short Fibers Reinforced Composites in Power Transmission Coupling
Abstract In this study the use of short glass, carbon and hybrid glass-carbon fibers reinforced polymeric composites in power transmission coupling is investigated. The presented work is generalized to thermoplastic and thermoset polymeric matrix composites. The effects of the constituents weight percentages, and average fibers length on the composite tensil
Lat. Am. j. solids struct.. Publicado em: 2017-10
-
20. Effect of Electron Beam and Gamma Rays on Carbon Nanotube Yarn Structure
Individual carbon nanotubes (CNTs) exhibit excellent mechanical, electrical and thermal properties, leading to development of a new generation of advanced lightweight materials and spacecraft electronics substituting the electronics based on silicon. The direct assembly of CNTs into macroscopic fibers or sheets has been a way to overcome their dispersion and
Mat. Res.. Publicado em: 18/09/2017
-
21. Bioelectrooxidation of Ethanol Using NAD-Dependent Alcohol Dehydrogenase on Oxidized Flexible Carbon Fiber Arrays
Hierarchical 3-dimensional flexible carbon fiber (FCF) array is a candidate as flexible electrode for enzyme electrochemistry, with interesting properties for application in enzymatic biofuel cell and implantable biosensors. Here, we show the fabrication of oxidized FCF electrode (FCFO) based on chemical surface treatment, a wet oxidation method by using per
J. Braz. Chem. Soc.. Publicado em: 2017-09
-
22. Tensile properties of novel carbon/glass hybrid thermoplastic composite rods under static and fatigue loading
ABSTRACT Novel carbon/glass hybrid thermoplastic composite rods have been developed consisting of a PAN-based carbon fiber, an E-glass fiber, and a thermoplastic matrix. Three types of hybrid rods with different carbon/glass ratios were then fabricated. The surface and cross-sectional morphologies of the hybrid rods were observed using a digital microscope.
Matéria (Rio J.). Publicado em: 20/07/2017
-
23. Fractographic and rheological characterizations of CF/PP-PE-copolymer composites tested in tensile
Abstract This work shows the fractographic study of fractured surfaces resulted from tensile tests of thermoplastic composites based on poly(propylene-co-ethylene) (PP-PE) and modified PP-PE copolymers reinforced with continuous carbon fibers (CF). The PP-PE matrix was modified with two agents called AM1 (based on maleic anhydride) and AM2 (containing an ela
Polímeros. Publicado em: 29/06/2017
-
24. Electromagnetic Properties of Multifunctional Composites Based on Glass Fiber Prepreg and Ni/Carbon Fiber Veil
ABSTRACT: Multifunctional composites combine structural and other physicochemical properties, with major applications in aeronautical, space, telecommunication, automotive, and medical areas. This research evaluates electromagnetic properties of multifunctional composites based on glass fiber woven fabric pre-impregnated with epoxy resin laminated together c
J. Aerosp. Technol. Manag.. Publicado em: 2017-06