Ca6nm
Mostrando 1-12 de 561 artigos, teses e dissertações.
-
1. Heterogeneous Fenton-like catalytic degradation of phenazine dye over CeO2 (CP-2) nanoscale powder
Abstract A heterogeneous Fenton-like process was explored for oxidation of phenazine dye using ceria polishing material (CP-2). XRD, SEM, FTIR, UV-vis DRS, and pHPZC techniques were applied to characterize the catalyst features. The performance of the heterogeneous Fenton-like process was investigated under various parameters (reaction time, pH, H2O2 concent
Cerâmica. Publicado em: 2022
-
2. Blue-Emitting MWO4:Tm3+ (M: Sr, Ba) Phosphors Prepared by Coprecipitation Method at Room Temperature
MWO4 host matrices (M: Sr, Ba) doped with different Tm3+ concentrations (0.02, 0.04, 0.06, 0.08 and 0.10 mol%) have been successfully prepared by the coprecipitation method at room temperature. The as-prepared nanophosphors were characterized by infrared spectroscopy showing intense absorption bands in the range of 700-1000 cm-1 attributed to the symmetrical
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
3. Influência do nitrogênio na resistência à erosão por cavitação do aço inoxídavel martensítico
RESUMO A adição de nitrogênio em aços inoxidáveis tem sido estudada como alternativa à produção de materiais que combinem boas propriedades mecânicas, resistência à corrosão e ao desgaste. Alguns métodos de enriquecimento de nitrogênio se respaldam em processos difusivos como nitretação a baixa e alta temperatura. Dentre estes, a nitretação
Matéria (Rio J.). Publicado em: 08/01/2018
-
4. Microstructure and Mechanical Properties of ASTM A743 CA6NM Steel Welded by FCAW Process
CA6NM steel is widely used in the manufacture of hydraulic turbines metallic parts, due to its resistance to corrosion and cavitation damage, combined with good weldability and fatigue properties. However, welding of this type of steel is complex and to ensure a minimum residual stress after welding it is necessary perform a post welding heat treatment (PWHT
Mat. Res.. Publicado em: 21/09/2017
-
5. Formação de Ferrita Delta na Soldagem de Aço Inoxidável Super Martensítico tipo CA6NM pelo Processo Plasma PTA
Resumo As pás de turbinas utilizadas na geração de energia em usinas hidrelétricas são fabricadas de aço inoxidável martensítico macio e estão sujeitas ao aparecimento de trincas pela presença da ferrita δ. As trincas precisam ser reparadas e processos de soldagem são utilizados. A ferrita δ mostra-se prejudicial às propriedades de resistência
Soldag. insp.. Publicado em: 2017-09
-
6. Calcium hydroxide associated with a new vehicle: Psidium cattleianum leaf extracts. Tissue response evaluation
Abstract The aim of this study was to evaluate edemogenic activity and subcutaneous inflammatory reaction induced by Psidium cattleianum leaf extracts associated with Ca(OH)2. Thirty male Wistar rats, split equally into three groups [aqueous extract + Ca(OH)2; ethanolic extract + Ca(OH)2; and propylene glycol + Ca(OH)2], were assessed every 3 h or 6 h (five
Braz. oral res.. Publicado em: 03/07/2017
-
7. Studies of the Colloidal Properties of Superparamagnetic Iron Oxide Nanoparticles Functionalized with Platinum Complexes in Aqueous and PBS Buffer Media
This work has focused on the synthesis of three nanosystems composed of superparamagnetic iron oxide nanoparticles (SPIONs) coated either with a carboxylate platinum(IV) complex (PD = cis,cis,trans-[Pt(NH3)2Cl2(HOOCCH2CH2COO)(OH)]) or with platinum(II) complex functionalized dextrans (DexPt1 = [Pt(Dex-NH2)Cl3] and DexPt2 = [Pt(Dex-NH2)(NH3)2(H2O)]). All nano
J. Braz. Chem. Soc.. Publicado em: 2017-05
-
8. Influência do tamanho de flocos e da concentração de ar dissolvido na eficiência da flotação
RESUMO O presente artigo apresenta resultados de pesquisa que teve por objetivo a investigação da influência do tamanho de partículas floculadas na eficiência da clarificação de águas para abastecimento por flotação por ar dissolvido (FAD) com o emprego de método e equipamento para a aquisição e análise de imagens especialmente desenvolvidos pa
Eng. Sanit. Ambient.. Publicado em: 2015-09
-
9. Application of decolourized and partially purified polygalacturonase and α-amylase in apple juice clarification
Polygalacturonase and α-amylase play vital role in fruit juice industry. In the present study, polygalacturonase was produced by Aspergillus awamori Nakazawa MTCC 6652 utilizing apple pomace and mosambi orange (Citrus sinensis var mosambi) peels as solid substrate whereas, α-amylase was produced from A. oryzae (IFO-30103) using wheat bran by solid state fe
Braz. J. Microbiol.. Publicado em: 2014
-
10. Efeito da temperatura interpasse na microestrutura, tenacidade ao impacto e propagação de trinca por fadiga de uniões soldadas por GTAW do aço ASTM A743-CA6NM
Atualmente os aços inoxidáveis martensíticos tem sido utilizados para a fabricação de turbinas hidráulicas, devido principalmente a sua elevada tenacidade. Entretanto, estes aços apresentam algumas restrições com relação à regiões recuperadas por soldagem, principalmente em razão da formação de martensita não revenida, a qual gera redução
Soldag. insp.. Publicado em: 2013-06
-
11. Sonication-assisted preparation of CaO nanoparticles for antibacterial agents
The effect of calcination conditions on the size and killing activity of CaO nanoparticles towards L. plantarum was studied in this paper. The results showed that CaO nanoparticles with a diameter of 20 nm could be obtained under the investigated conditions. The lethal effect of CaO nanoparticles after incubation of 6 or 24 h increased with increasing calcin
Quím. Nova. Publicado em: 2013
-
12. Eletrodos porosos contendo TiO2 e WO3 : propriedades eletroquímicas e atividade fotocatalítica para remoção do corante Rodamina 6G e do hormônio 17 a-etinilestradiol em solução aquosa / Porous electrodes containig TiO2 and WO3 : eletroctrochemical properties and photocatalytic activity for removal of Rodhamine 6G dye and 17 alfa -ethynylestradiol
Porous films electrodes containing TiO2 and WO3 were deposited on SnO2:F (FTO) conducting glass from aqueous suspensions with TiO2 Degussa P25®, WO3 precursors and polyethylene glycol, followed by heating (450°C, 30 min). The maximum absorption was respectively observed at 390 and 480 nm for TiO2 and WO3 samples; intermediate values were obtained for the m
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/07/2012