Buildings Materials
Mostrando 1-12 de 89 artigos, teses e dissertações.
-
1. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
2. Computational Verification of the NBR 15.220-3 Recommendations for Thermal Comfort in the City of Curitiba
Abstract The Brazilian Standard for Thermal Performance and Bioclimatic Zoning (NBR 15.220-3) establishes twelve strategies to achieve thermal comfort inside buildings considering the dry bulb temperature and the predominant humidity in each climate. These strategies are visualized in the Bioclimatic Charts of Brazil main cities. This study seeks, through c
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
3. Verification of the reaction to fire of water-based and oil-based enamel paints used as finish of walls in residential buildings
ABSTRACT Among that materials whose behavior facing fire has not yet been understood thoroughly lie paints used as finish of interior and exterior walls of buildings. This study aimed to analyses the reaction to fire of enamel paints exposed to elevated temperatures, so two paints were tested: one water-based and one oil-based, both applied over a white unde
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Case study: influence of performance levels of ABNT NBR 15575 without consumption of materials used in reinforced concrete structures
Resumo O setor da construção civil ainda discute a consequência da Norma de Desempenho nas edificações habitacionais. Segundo a ABNT NBR 15575 [1], os sistemas que compõem edificações residenciais necessitam atingir os requisitos mínimos de desempenho. Dentre os sistemas, o estrutural deve atender a uma Vida Útil de Projeto (VUP) mínima de 50 anos
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
5. Caracterização de partículas de açaí visando seu potencial uso na construção civil
RESUMO Na Amazônia, o principal potencial de contribuição para os Objetivos de Desenvolvimento Sustentável (ODS), está no aproveitamento de resíduos da agroindústria para uso na construção civil, como alternativa de novos materiais sustentáveis. Neste contexto, objetivou-se com este trabalho avaliar o potencial uso de partículas de resíduos de a�
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Indoor Air Quality in the Hospital: The Influence of Heating, Ventilating and Conditioning Systems
Abstract Clean, fresh air is the most important requirement for good indoor air quality (IAQ) in all buildings, but it is especially important with regard to the environments within hospitals and other healthcare facilities. The literature indicates that buildings with heating, ventilating and air conditioning (HVAC) systems may have an increased risk of sic
Braz. arch. biol. technol.. Publicado em: 05/09/2019
-
7. Glycerol Effect on the Corrosion Resistance and Electrodeposition Conditions in a Zinc Electroplating Process
Zinc electrodeposition is an economical process of Zn coating compared to conventional galvanic process. The galvanizing process is used in various industrial sectors to protect ferrous alloys during the corrosion process. In buildings, the galvanizing process is widely used to coat mortar protective screens. The electrodeposition of zinc has a relatively lo
Mat. Res.. Publicado em: 19/08/2019
-
8. Diretrizes para o planejamento de uma demolição seletiva em edifícios
Resumo: O objetivo do presente artigo é desenvolver um conjunto de diretrizes que permitam aprimorar o planejamento das atividades de demolição e promover práticas mais sustentáveis no canteiro de obras de demolição. A pesquisa empírica foi realizada através de três estudos de caso, desenvolvendo um diagnóstico do funcionamento das atividades das
Interações (Campo Grande). Publicado em: 08/08/2019
-
9. BOVINE WELLFARE HANDLED IN ADAPTED CORRAL WITH UNCONVENTIONAL MATERIALS
ABSTRACT This study aimed at evaluating bovine behavioral parameters managed in crowding pens built with modular panel of reforestation wood and homogeneous particle sheets of sugarcane bagasse and in conventional wooden crowding pens. The animals treated had their body surface temperature measured by the infrared thermography method and the behavior evaluat
Eng. Agríc.. Publicado em: 19/06/2019
-
10. Argamassas eco-eficientes com incorporação simultânea de material de mudança de fase e cinzas volantes
RESUMO Atualmente, a indústria da construção é um dos principais setores europeus responsáveis pelos elevados níveis de consumo de energia, extração de matérias-primas e produção de resíduos. Cada vez mais o consumo de energia proveniente de fontes renováveis e a reutilização de resíduos industriais constituem a única maneira de minimizar es
Matéria (Rio J.). Publicado em: 10/06/2019
-
11. Reabilitação térmica: Contributo das argamassas com incorporação de material de mudança de fase
RESUMO O setor residencial encontra-se muitas vezes envelhecido, apresentando necessidades de intervenções urgen-tes. Assim, torna-se importante reabilitar edifícios do ponto de vista estrutural, estético e funcional. A reabili-tação térmica é uma importante oportunidade para atingir níveis mais elevados de desempenho energético, reduzindo a elevad
Matéria (Rio J.). Publicado em: 10/06/2019
-
12. DISPLACEMENT MEASUREMENT IN SAWN WOOD AND WOOD PANEL BEAMS USING PARTICLE IMAGE VELOCIMETRY
ABSTRACT Throughout their useful life structures demand monitoring to verify their conditions of use. Thus, the need arises to seek methodologies capable to evaluate displacements and deformations in structural components of buildings. The objective of this research was to evaluate the use of the particle image velocimetry (PIV) technique to analyze test spe
CERNE. Publicado em: 20/05/2019