Building Material
Mostrando 25-36 de 266 artigos, teses e dissertações.
-
25. Geopolymer/PEG Hybrid Materials Synthesis and Investigation of the Polymer Influence on Microstructure and Mechanical Behavior
Geopolymers are aluminosilicate inorganic polymers, obtained from the alkali activation of powders containing SiO2+Al2O3>80wt%, mainly proposed as environmentally friendly building materials. In this work, metakaolin-based geopolymers have been prepared and a water-soluble polymer, polyethylene glycol (PEG), has been added in different percentages to obtain
Mat. Res.. Publicado em: 25/08/2015
-
26. The Multiple Faces of Eugenol. A Versatile Starting Material and Building Block for Organic and Bio-Organic Synthesis and a Convenient Precursor Toward Bio-Based Fine Chemicals
Phenylpropenes are produced by plants as part of their defense strategy against microorganisms and animals, and also as floral attractants of pollinators. Eugenol, the main component of clove’s essential oil, is an inexpensive and easily available phenylpropene that has been known by humankind since antiquity, and used as a medicinal agent, but also for fo
J. Braz. Chem. Soc.. Publicado em: 2015-06
-
27. Compressive stress-strain behaviour of cement mortar-composites reinforced with short sisal fibre
To design building elements using sisal fibre reinforced mortar composites, the stress-strain curves of the composites both under tensile and compression load is needed. In this study short sisal fibre-cement based composites were developed and their stress-strain behaviour under compression characterized experimentally. The composites consisted of two morta
Mat. Res.. Publicado em: 05/11/2013
-
28. Properties of recycled high density polyethylene and coffee dregs composites
Composites of recycled high density polyethylene (HDPE-R) and coffee dregs (COFD) were elaborated. The blends were made at the proportions of 100-0, 90-10, 80-20, 70-30, 60-40, 50-50 and 40-60% polymer-filler ratio. The materials were evaluated through scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetry/derivative th
Polímeros. Publicado em: 2013
-
29. Concreto ultraleve® estrutural com pérolas de EPS: caracterização do material e estudo de sua aplicação em lajes / Structural ultra lightweight concrete with EPS beads: material characterization and study of its use in slabs
The use of lightweight concrete is mainly due to the benefits provided by reducing the density of the material such as smaller efforts on structures, economy of molds and scaffolding, as well as lower costs of transportation and erection of precast constructions. Currently, besides the technical and economic issues, the choice of building materials should ta
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/10/2012
-
30. Contribuição ao estudo da estabilidade de edifícios de andares múltiplos em aço / Contribution to the study of stability of steel multi-storey buildings
This work presents a comparative analysis of different structural systems for a 20-storey building. Each model has been designed using the principles of the direct analysis method (DAM), present in the ABNT NBR 8800:2008. The first-order amplification method (FOAM) was used to obtain, in a simplified manner, the forces acting on the building elements, includ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/08/2012
-
31. Avaliação estatística do erro de modelos de resistência para elementos lineares de concreto armado da ABNT NBR 6118:2007 / Statistical evaluation of resistance modelling error for linear elements of concrete structures of ABNT NBR 6118:2007
In a design of structures, it should be considered the intrinsic uncertainties to the present variables in the structure and in the structural concept, such as intensity and action distribution, mechanic properties of the material, geometric parameters of the structure and structural analysis and calculus models. Thus, the structural safety can only be measu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/08/2012
-
32. Modelagem do comportamento dinâmico de edifícios mistos (aço-concreto) submetidos à ação do vento. / Modeling of the dynamic behaviour of steel-concrete composite buildings submited to wind actions.
Based on a favorable economic scenario and technological advances of material sciences and construction processes, in the last three decades, the Brazilian cities have presented a substantial growth, with respect to construction of residential and commercial multi-storey buildings. Nowadays, these buildings present greater slenderness and have been construct
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/05/2012
-
33. Implicações do (des)alinhamento entre estratégia competitiva e competências financeiras organizacionais
Based on the increase in competition and the need for new management tools to enable companies creating and sustaining competitive advantages and considering that financial management is an important activity for all organizations, this study aimed to uncover the implications of the alignment or non-alignment between competitive strategy and financial compet
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/03/2012
-
34. Roof modular system in wood and particle board (OSB) to rural construction
Wood is a material of great applicability in construction, with advantageous properties to form various structural systems, such as walls and roof. Most of the roof structural systems follow models that have remained unchanged for a long time. A roof modular system in distinguished materials is proposed: reforested wood (Pine), oriented strand board (OSB) an
Scientia Agricola. Publicado em: 2012-06
-
35. Adoção da certificação leed em meios de hospedagem: esverdeando a hotelaria?
A pesquisa objetivou analisar o processo de adoção da certificação "Leadership in Energy and Environmental Design" (LEED) a partir dos estabelecimentos do setor hoteleiro que já a adotaram. Para sua concretização procedeu-se uma pesquisa bibliográfica, coleta de dados secundários em sites institucionais, periódicos e material documental, bem como d
Revista de Administração de Empresas. Publicado em: 2012-04
-
36. Sensores e biossensores baseados em transistores de efeito de campo utilizando filmes automontados nanoestruturados / Sensors and biosensors based on field-effect transistors using nanostructured self-assembled films
Separative extended gate field-effect transistor (SEGFET) device is an alternative to the conventional ion-sensitive field-effect transistor (ISFET). The great advantage of SEGFET refers to its easy processing, i.e., it is limited under only manipulation of the gate electrode, avoiding the conventional microelectronic processes. In this way, ion sensors and
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/11/2011