Binder
Mostrando 1-12 de 374 artigos, teses e dissertações.
-
1. Influence of bottom ash and red mud additions on self-leveling underlayment properties
Abstract Self-levelling underlayments (SLUs) based on Portland cement (PC) are susceptible to cracking due to drying shrinkage. The present study evaluated the influence of binder contents on systems consisting of calcium aluminate cement (CAC), PC, and a source of calcium sulfate (C$), derived from the flue gas desulfurization process (FGD), on the mechanic
Cerâmica. Publicado em: 2022
-
2. A review on the ceramic additive manufacturing technologies and availability of equipment and materials
Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metal
Cerâmica. Publicado em: 2022
-
3. Manufacturing and characterization of sustainable macroporous glass foams
Abstract This work produced glass foams from soda-lime glass bottles, bentonite, and alumina by the replica method. Compositions with different contents of bentonite (5, 10, 15, and 20 wt%) were prepared and heat-treated at 800 °C. In the alumina-added compositions, 50 wt% of the bentonite was replaced by the alumina. The influences of the content of benton
Cerâmica. Publicado em: 2022
-
4. Nerve-sparing robotic-assisted radical prostatectomy: how I do it after 15.000 cases
ABSTRACT Introduction: Over the years, since Binder and Kramer described the first Robotic-assisted Radical Prostatectomy (RARP) in 2000, different Nerve-sparing (NS) techniques have been proposed by several authors (1). However, even with the robotic surgery advantages, functional outcomes following RARP, especially erection recovery, still challenge surge
International braz j urol. Publicado em: 2022
-
5. Evaluation of the combined addition of aluminum lactate and calcium carbonate to alumina-based castables
Abstract Calcium aluminate cement (CAC) can induce the development of high green mechanical strength to refractory castables in a short period of time (24 h). However, the production of this hydraulic binder is energy-intensive and releases a large content of carbon dioxide (CO2), which adds to global warming. Thus, aiming to develop an alternative binding s
Cerâmica. Publicado em: 2021-06
-
6. Ternary system Portland cement-calcium aluminate cement-calcium sulfate applied to self-leveling mortar: a literature review
Abstract The modernization of building systems is increasingly demanding products that improve efficiency during their processing. The development of self-leveling mortars for the regularization of flooring is a consequence of this evolution. The high contents of binder and water to obtain self-flowing property, plus the application of thin layers over large
Cerâmica. Publicado em: 2021-03
-
7. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
8. Stabilization of sandy soil with high content of asphalt emulsion
Abstract The purpose of this article is to evaluate the shear strength parameters of mixtures of sandy soil with high asphalt emulsion contents for their use in geotechnical structures, such as zoned earth dams, embankments, etc. The methodology adopted consisted of: collecting and characterizing samples of sandy soil to be laboratory tested; compacting the
REM, Int. Eng. J.. Publicado em: 2020-06
-
9. Post-elastic Deformation Characteristics of Hybrid Fibre Reinforced Concrete Composites
Abstract The present study was focused on evaluating the strength and failure properties of hybrid micro-fibre concretes containing micro brass and steel fibre additions. Experimental tests were conducted on different hybrid fibre concretes containing aligned fibres in the direction of beam axis and the relative mechanical performance was compared to randoml
Lat. Am. j. solids struct.. Publicado em: 10/01/2020
-
10. Consumption of superplasticizer admixture for different cements and their binder efficiency
Resumo Foram estudados, em cimentos e fillers calcários, os teores ótimos de superplastificante (base policarboxilato éter), determinados através de reometria rotacional, e estimados seus efeitos nos impactos ambientais de concretos. Ensaios de espalhamento de argamassas em mesa de consistência foram feitos para determinação da redução de água e es
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
11. Preparation and properties of α-tricalcium phosphate microspheres by spray drying
Resumo Microesferas de α-TCP foram obtidas atomizando uma suspensão aquosa contendo 50% em massa de α-TCP com baixa cristalinidade e 1% em massa de ácido cítrico. Poli(etileno glicol) e poli(álcool vinílico) foram testados como ligantes. O processo de spray drying resultou em microesferas com diâmetros médios de aproximadamente 20 μm e esfericidade
Cerâmica. Publicado em: 14/11/2019
-
12. β-Tricalcium phosphate shaped by replica method
Resumo Biomateriais, como o fosfato tricálcico, podem apresentar diferentes taxas de reabsorção no organismo que dependem das suas propriedades físico-químicas sendo que a condição superficial, tais como morfologia, tamanho de partículas e porosidade, é de fundamental importância. Assim, neste trabalho, estudou-se o recobrimento da matriz Luffa cyl
Cerâmica. Publicado em: 14/11/2019