Binary And Ternary Catalysts
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. Iridium-Based Catalysts for the Ethanol Electrooxidation in Acidic Media
Herein we sinthesize and investigate Ir-based nanocatalysts (dispersed in carbon) in different atomic compositions combining two (IrRh) and three metals (IrRhSn). These materials were evaluated towards the ethanol electrooxidation in acidic electrolyte in presence of three ethanol concentrations using cyclic voltammetry, while the species produced during the
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
2. OXIDATION OF CYCLOHEXANOL ON PHOSPHOTUNGSTIC ACID ANION INTERCALATED LAYERED DOUBLE HYDROXIDES WITH AQUEOUS H2O2 AS OXIDANT
The layered double hydroxides (LDH) of Mg2AlNi and Mg3Al pillared by Keggin-type phosphotungstic acid anion (POM), i.e. Mg2AlNi-POM LDH and Mg3Al-POM LDH were synthesized by an ion-exchange method. The synthesized POM intercalated LDH compounds were characterized using various techniques such as FTIR, XRD, TGA and BET. The observed results show that the obta
Quím. Nova. Publicado em: 2018-01
-
3. STUDY OF THE OXIDATION OF METHANOL AND ETHANOL ON BINARY AND TERNARY ELECTROCATALYSTS BASED ON PLATINUM, RHODIUM AND MOLYBDENUM / ESTUDO DAS OXIDAÇÕES DO METANOL E DO ETANOL SOBRE ELETROCATALISADORES BINÁRIOS E TERNÁRIOS À BASE DE PLATINA, RÓDIO E MOLIBDÊNIO
Study of oxidation of methanol and ethanol in acid medium, binary and ternary electrocatalysts based on platinum, rhodium and molybdenum supported on high surface area carbon prepared by alcohol reduction method. Was performed through the electrochemical techniques of cyclic voltammetry and chronoamperometry. The catalysts were characterized using transmissi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/08/2011
-
4. Perovskitas contendo lantânio, ferro e cobalto - melhoramento de propriedades texturais via síntese por nanomoldagem e avaliação como catalisadores na redução de NO com CO
Mixed oxides with perovskite structure have high potential as catalysts in gas depollution processes and particularly in the abatement of nitrogen oxides (NOx). Such solids could be considered as a promising alternative for the replacement of noble metals based catalysts, whose use is predominant. Great flexibility of composition, easy synthesis, low cost an
Publicado em: 2008
-
5. Preparação, caracterização e estudo eletroquímico de ligas Pt/M e Pt/M/M1 (M, M1 = Mo, Sn, Ru, Os e W) para eletrooxidação de etanol com aplicações em DEFC / Preparation, characterization and electrochemical studies on Pt/M/M1 (M,M1 = Mo, Sn, Ru, Os and W) catalysts for ethanol oxidation and DEFC application
A eletrooxidação de etanol foi investigada sobre catalisadores bi e trimetálicos constituídos de Pt-M1 e Pt-M-M1 M = Sn, Mo, W, Ru, Os e Ir). Os eletrodos foram preparados em três diferentes configurações: eletrodos lisos (preparados em forno a arco voltaico), filmes depositados em placas de Ti (Pt-M/Ti) e nanopartículas metálicas dispersas em carbo
Publicado em: 2007
-
6. Desenvolvimento de catalisadores de composições binárias e ternárias preparados pelo método sol-gel para células a combustível de etanol direto / "Development of binary and ternary catalysts prepared by the sol-gel method for direct ethanol fuel cells"
Este trabalho descreve o desenvolvimento e a caracterização de novos materiais catalíticos para a oxidação de etanol em células a combustível. Os materiais foram preparados pela incorporação de diferentes metais nobres, tais como Pt, Ru, Rh e/ou Ir, no carbono Vulcan® XC-72 de alta área superficial, como misturas binárias e ternárias, usando o m
Publicado em: 2007
-
7. Synthesis and characterization of PtRu/C catalysts obtained by colloidal and deposition methods for fuel cell applications
The purpose of this investigation was to compare catalysts produced by the Bönnemann - colloidal method (PtRu (B1) and PtRu (B2)), and those produced by the spontaneous deposition method (PtRu (SD)). The catalysts produced by both methods had good electrochemical behavior for methanol oxidation for proton exchange membrane fuel cell applications. The struct
Materials Research. Publicado em: 2005-06