Behavior
Mostrando 25-36 de 16547 artigos, teses e dissertações.
-
25. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
26. Behavior of plaster with water-repellent additive under natural aging
Abstract This research evaluates the behavior of plaster with a water-repellent additive when submitted to a natural aging process. Casting plaster and silane/siloxane-based water-repellent were used as materials. The water/plaster ratio was set at 0.7 and the contents of 0.2% and 0.4% of water-repellent were used, in relation to the plaster mass. Plaster pa
Cerâmica. Publicado em: 2022
-
27. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
28. Finite element computational development for thermo-mechanical analysis of plane steel structures exposed to fire
Abstract This article presents a numerical formulation based on finite element procedures for application in nonlinear thermo-mechanical analyses of steel planar structures under fire condition. The mechanical properties of structural elements degrade when subjected to high temperatures, resulting in significant reductions in strength and stiffness. Under th
REM - International Engineering Journal. Publicado em: 2022
-
29. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
30. THE INFLUENCE OF THE FILM FORMED ON THE PRATO CHEESE SURFACE DURING THE NACL AND KCL SALTING PROCESS: APPLICATION OF THE FINITE ELEMENT METHOD AND NEURAL NETWORKS OF THE SELF-ORGANIZING MAP (SOM) AND MULTILAYER PERCEPTRON (MLP) TYPES
Sodium chloride is used in the cheese salting process as it promotes sensory changes and food preservation. However, in excess can cause hypertension problems, and for this reason, it has been partially replaced by potassium chloride. In the present work, Prato cheese was subjected to joint diffusion of NaCl and KCl by immersion in static and stirred brine.
Química Nova. Publicado em: 2022
-
31. Prevalence of suicide in cocaine users accessing health services: a systematic review and meta-analysis
Objective: This study reviewed and analyzed the prevalence of suicidal behaviors among cocaine users who sought health services. Methods: This is a systematic review and meta-analysis of studies published until January 2021. PubMed/MEDLINE, Scopus, Embase, PsycINFO, and LILACS were searched. The inclusion criteria were observational (retrospective or prospe
Brazilian Journal of Psychiatry. Publicado em: 2022
-
32. The Concept of a Rupture Risk Envelope for the Cochleo-Saccular Membranes
Abstract Introduction Alterations in endolymphatic pressure have long been suspected of being associated with the development of endolymphatic hydrops and rupture of the membranous labyrinth. More recently, there has been a focus on how membrane mechanics might contribute to membrane rupture. This is suspected to involve the viscoelastoplastic properties of
International Archives of Otorhinolaryngology. Publicado em: 2022
-
33. Temperature Dependent Emission Properties of ReI Tricarbonyl Complexes with Dipyrido-Quinoxaline and Phenazine Ligands
In this work, the emission properties of fac-[Re(CO)3(NN)(py)]+, NN = 1,10-phenanthroline (phen), dipyrido[3,2-f:2’,3’-h]quinoxaline (dpq) and dipyrido[3,2-a:2’3’-c]phenazine (dppz); py = pyridine were investigated in different temperatures, ranging from 80 to 300 K, and in different solvent mixtures and in polymethyl methacrylate. The changes observ
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
34. Validation of the Family Health Behavior Scale for the Brazilian population
Abstract Objective: To validate the Family Health Behavior Scale (FHBS) for Brazilian families. Methods: The sample included 272 children aged 5 to 12 years old. Caregivers and their healthy answered the FHBS and questions about physical activity. In addition, anthropometric measurements of the children’s weight and height were performed, as well as the
Jornal de Pediatria. Publicado em: 2022
-
35. Heart rate turbulence assessed through ergometry after myocardial infarction: a feasibility study
ABSTRACT BACKGROUND: Coronary artery disease is an important cause of morbidity and mortality. The impact of ventricular arrhythmias with impaired cardiac vagal activity is one of the most recently studied prognostic factors. However, there are no studies evaluating the phenomenon of heart rate turbulence (HRT) during physical exertion. OBJECTIVE: To stu
Sao Paulo Medical Journal. Publicado em: 2022
-
36. Experimental Loss Segregation in a Solid Rotor Induction Motor
Abstract Solid rotor induction motors (SRIMs) are asynchronous motors suited for high speed applications. This work presents an experimental case study where standard loss segregation procedures for induction motors are performed with a two-phase smooth solid rotor induction motor in order to verify their applicability. Even though the machine is supposed to
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022