Beams
Mostrando 1-12 de 574 artigos, teses e dissertações.
-
1. Fuzzy Boundary for Beams Vibrations in Vehicles
ABSTRACT This work aims to study the transversal motion of a car’s chassis, modeled by a beam and supported at its ends by two sets of spring-damper elements. A finite differences method is utilized along with Robin boundary conditions to solve the mathematical modeling. The constants of the boundary conditions are modeled by a fuzzy parameter obtained thr
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
2. Numerical formulation for nonlinear analysis of concrete and steel shells with deformable connections
Abstract A two-dimensional interface finite element capable of associating flat shell elements positioned one above the other was developed. The implemented interface element can physically simulate the contact between the flat shell elements and connect the reference planes of the shell elements above and below it. The formulation presented allows considera
REM, Int. Eng. J.. Publicado em: 2021-09
-
3. Numerical analysis of collapse modes in optimized design of alveolar Steel-concrete composite beams via genetic algorithms
Abstract The objective of this study is to present the formulation and applications of the optimization problem of steel-concrete composite alveolar beams. In addition to presenting the formulation, a comparative analysis of the predominant collapse modes is performed numerically via the finite element method. The optimization program was developed with the
REM, Int. Eng. J.. Publicado em: 2021-06
-
4. Utilizing the Shift-or-Shrink Algorithm to Optimize the Direct Coupling from Laser Diodes to Diffused Channel Waveguides
Abstract Several formulae for computing the direct coupling efficiencies from laser diodes to diffused channel waveguides, based on mathematic models for approximating the corresponding laser beams and the waveguiding modes, have been derived in this paper. Then, the authors utilize a simple shift-or-shrink (SOS) algorithm to seek their optimal coupling cond
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
5. Reliability assessment of cold-formed steel beams by the FORM method
Abstract This article presents a procedure for the reliability assessment of cold-formed steel beams based on the Direct Strength Method (DSM) and the Effective Section Method (ESM). Using a comprehensive database, a statistical analysis of the test results was performed to determine the statistical properties of the professional factor random variable. The
REM, Int. Eng. J.. Publicado em: 2021-06
-
6. C-Band Monopulse Planar Array and Feeding Network
Abstract Monopulse radars operate with simultaneous beams and are used for tracking purposes, relying only on hardware to provide a real-time indication of the target position. A monopulse array and its feeding network is implemented and tested, in the frequency of 5.4 GHz, based on patch antennas using dieletric to provide wide bandwidth and high gain. The
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
7. Microstructural and mechanical characterisation of the Simon Bolivar's iron bridge structure, 19th century, Arequipa, Peru
Abstract The microstructure of the main structural elements (Phoenix columns, transversal beams and tie-rods) of the Simón Bolivar iron bridge, located in Arequipa (Peru), was investigated. The bridge was supposedly designed by Gustave Eiffel and opened to the public in 1882. The characterisation revealed that the columns, beams and tie-rods are made of pud
REM, Int. Eng. J.. Publicado em: 2020-12
-
8. Two-dimensional beams in rectangular coordinates using the radial point interpolation method
Abstract The three-dimensional Theory of Elasticity equations lead to a complex solution for most problems in engineering. Therefore, the solutions are typically developed for reduced systems, usually symmetrical or two-dimensional. In this context, computational resources allow the reduction of these simplifications. The most recognized methods of algebraic
REM, Int. Eng. J.. Publicado em: 2020-03
-
9. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
10. Number of laminae on the mechanical behavior of glued laminated timber (glulam) of Toona ciliata produced with vegetable polyurethane adhesive
RESUMO A madeira laminada colada (MLC) é um material compósito obtido a partir da colagem de lâminas de madeira dispostas com as fibras paralelas entre si. O objetivo deste trabalho foi avaliar a influência do número de lâminas no comportamento mecânico de MLC de Toona ciliata produzidas com adesivo poliuretano de base vegetal. As vigas de MLC foram p
Ciênc. agrotec.. Publicado em: 20/12/2019
-
11. Experimental investigation on shear resistance of self-consolidating concrete beams
Resumo O concreto autoadensável se destaca pela alta fluidez e estabilidade, sendo estas propriedades obtidas com a redução da granulometria e volume de agregado graúdo da mistura, adição de materiais finos e a utilização de aditivos superplastificantes e modificadores de viscosidade. Um programa experimental foi realizado para avaliar a influência
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
12. Optimized dimensioning of steel-concrete composite beams
Resumo As seções mistas de aço e concreto estão cada vez mais sendo utilizadas na construção civil, tanto no cenário mundial quanto no Brasil. O trabalho conjunto do perfil de aço e da laje de concreto aumenta consideravelmente o desempenho do elemento estrutural misto devido ao aproveitamento das vantagens de cada material. Neste trabalho, é utiliz
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019