Beam Column
Mostrando 13-24 de 63 artigos, teses e dissertações.
-
13. Study of PtPd Bimetallic Nanoparticles for Fuel Cell Applications
Bimetallic nanoparticles are of special interest for their potential applications for fuel cells, mainly for portable power applications. Among the bimetallic systems, Pt-Pd bimetallic nanoparticles have received great interest as they can be widely used as effective catalysts for various electrochemical reactions. In this work, Pt-Pd alloy bimetallic nanopa
Mat. Res.. Publicado em: 15/05/2017
-
14. Classification System for Semi-Rigid Beam-to-Column Connections
Abstract The current study attempts to recognise an adequate classification for a semi-rigid beam-to-column connection by investigating strength, stiffness and ductility. For this purpose, an experimental test was carried out to investigate the moment-rotation (M-θ) features of flush end-plate (FEP) connections including variable parameters like size and nu
Lat. Am. j. solids struct.. Publicado em: 2016-11
-
15. A stochastic approach for the wind load effect on steel structures
Abstract The Brazilian design load standard still provides a wind speed map developed in 1977. Since then, new data have been collected and new charts have been proposed in literature. The literature not only alerts to changes in short-term wind gust patterns, but it also warns that the wind speed values are higher than observed in the past. Many researchers
Rem: Rev. Esc. Minas. Publicado em: 2016-06
-
16. Behavior of Damaged Exterior RC Beam-Column Joints Strengthened by CFRP Composites
Abstract This paper presents an experimental investigation on the behavior of retrofitted beam-column joints subjected to reversed cyclic loading. The experimental program comprises 8 external beam-column joint connection subassemblages tested in 2 phases; one was the damaging phase and second was the repairing phase. The Beam-column joints were designed onl
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
17. Fire response of a 3D multi-storey building with buckling restrained braces
Abstract This paper investigates the performance of a three-dimensional multi-storey structure with Buckling Restrained Brace system (BRBs) under fire condition, using a sequentially coupled nonlinear thermal stress analysis. Efficiency of using BRBs in enhancing the strength and stiffness of a structural frame is compared with that of Ordinary Concentricall
Lat. Am. j. solids struct.. Publicado em: 2015-11
-
18. Seismic performance of ductility classes medium RC beam-column connections with continuous rectangular spiral transverse reinforcements
The seismic performance of RC columns can considerably be improved through the use of continuous spiral reinforcement in terms of ductility and energy dissipation capacity. Since the beam-column connections were subjected to brittle failure after earthquakes, the simultaneous application of this method in both beams and columns could greatly improve the seis
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
19. Severe Loading Assessment of Modern and New Proposed Beam to Column Connections
AbstractThe performance of two different steel beam to column connections known as SidePlateTM and a new proposed connection by seismic loading and progressive collapse were investigated in this research. Seismic performance evaluated included consideration of interstory drift angles and flexural strengths based on 2010 AISC Seismic Provisions while investig
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
20. Nonlinear Equilibrium and Stability Analysis of Axially Loaded Piles Under Bilateral Contact Constraints
AbstractThis paper presents a nonlinear stability analysis of piles under bilateral contact constraints imposed by a geological medium (soil or rock). To solve this contact problem, the paper proposes a general numerical methodology, based on the finite element method (FEM). In this context, a geometrically nonlinear beam-column element is used to model the
Lat. Am. j. solids struct.. Publicado em: 2015-04
-
21. Stability of concrete beam-columns under follower forces
An axial follower force acting on the free end of a beam-column is known to remain tangential to its elastica at that point. Elastic beam-columns exhibit infinitely high buckling resistance to static compressive follower load. Loss of their dynamic stability is known to occur at critical follower loads, by flutter characterized by vanishing lateral displacem
Lat. Am. j. solids struct.. Publicado em: 2014-10
-
22. Estudo experimental de uma ligação viga-pilar em concreto pré-moldado utilizando perfis metálicos e solda / Experimental study of a precast concrete beam-column connection using welded steel shapes
Nesta pesquisa estudou-se o comportamento de uma ligação viga-pilar em concreto pré-moldado utilizando perfis metálicos embutidos nos elementos estruturais. O modelo da ligação estudada permite a transmissão de momentos fletores positivo e negativo. Para a continuidade de momento fletor negativo, utilizam-se um consolo metálico com seção \"U\" embu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/09/2012
-
23. Estudo do comportamento estrutural de ligações parafusadas viga-pilar com chapa de topo estendida: análise numérica / Analysis of structural behavior of extended end-plate bolted beam-to-column connections: numerical analysis
Este trabalho apresenta um estudo do comportamento estrutural das ligações metálicas parafusadas viga-pilar com chapa de topo estendida. Enfatiza-se a fundamentação teórica, abordando os principais conceitos, os métodos de dimensionamento apresentados em normas internacionais e os principais sistemas de classificação de ligações existentes. O obje
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/08/2012
-
24. Ligação viga-pilar em elementos pré-moldados de concreto solidarizados por concreto reforçado com fibras de aço: análises estática e dinâmica / Beam-column connection in precast concrete structures using steel fiber reinforced concrete
No presente trabalho, utiliza-se concreto com fibras de aço, traspasse de armaduras e chaves de cisalhamento para desenvolver uma ligação viga-pilar capaz de resistir a ações cíclicas e dinâmicas e que possa ser empregada na pré-moldagem de estruturas de casas de força de usinas hidrelétricas. Para atingir este objetivo, inicialmente foram realizad
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/06/2012