Batch Experiments
Mostrando 1-12 de 261 artigos, teses e dissertações.
-
1. Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants
Additive manufacturing is an emerging tool that has contributed to the sustainable fabrication of devices in several areas based on the concept of “zero waste”. Considering extrusion-based manufacturing (or 3D printing), polylactic acid (PLA) has been highlighted due to its biodegradability, obtention from renewable sources, and compatibility for 3D prin
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. PEACH PIT CHEMICALLY TREATED BIOMASS AS A BIOSORBENT FOR METFORMIN HYDROCHLORIDE REMOVAL: MODELING AND SORPTION MECHANISMS
ABSTRACT In this work, the potential of peach pit biosorption in the removal of the drug metformin hydrochloride from water is evaluated. Experiments are carried out in a closed batch system to evaluate the effect of the solution pH (2–10), temperature (25, 35 and 45 °C), stirring (100, 150 and 200 rpm) and chemical treatments. During the study, biosorben
Eng. Agríc.. Publicado em: 2021-04
-
3. REMEDIACIÓN ELECTROCINÉTICA DE UN SUELO REAL CONTAMINADO CON PLOMO ASISTIDA CON LA ADICIÓN DE UN AGENTE COMPLEJANTE
The use of ethylenediaminetetraacetic acid disodium salt (Na2EDTA) as a chelating agent presents ideal characteristics to be used for the removal of lead from a contaminated site. Batch experiments together with a simple local equilibrium model were carried out to evaluate the role of EDTA as enhancing agent in electrokinetic remediation of a Pb-contaminated
Quím. Nova. Publicado em: 2020-09
-
4. Combined Analytical Py-GC/MS, SEM, FTIR and 13C NMR for Investigating the Removal of Trace Metals from Aqueous Solutions by Biochar
In this study, the efficiency of biochar (BC) produced from sugarcane bagasse at different pyrolysis temperatures (300, 400, 500 and 600 ºC) for simultaneous removal of CdII, PbII, CuII, CrIII, NiII and ZnII ions from aqueous solutions was assessed. All BC were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), 13C nu
J. Braz. Chem. Soc.. Publicado em: 2020-07
-
5. Concomitant Production of Hydrogen, Sodium Acetate, and Polymerized Species from Non-Catalytic Ethanol Dehydrogenation
A detailed study of the production of hydrogen and high added-value liquid products from the ethanol dehydrogenation reaction in the presence of sodium hydroxide (10% m m-1) was undertaken. Experiments were carried out in a batch reactor under different reaction conditions (temperature of 240 ºC and autogenous pressure between 45 and 72 bar), with analysis
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
6. Activated carbon loaded with manganese and iron for glyphosate adsorption: Kinetics, isotherms and thermodynamic studies
Resumo Carvão ativado granular foi impregnado com 1% de ferro e 0,5% de manganês (m/m) para remoção de glifosato em soluções aquosas. O adsorvente foi caracterizado por microscopia eletrônica de varredura, espectroscopia de energia dispersiva, técnicas de adsorção de nitrogênio e análises de potencial zeta. Estudos em batelada foram realizados pa
Rev. Ambient. Água. Publicado em: 25/11/2019
-
7. Pós-tratamento de lixiviados coagulados por adsorção em resíduos da ostreicultura
RESUMO Neste trabalho, foi realizado o tratamento do lixiviado de um aterro urbano por meio de uma combinação dos processos de coagulação/floculação e adsorção. O lixiviado empregado foi coletado no aterro de resíduos sólidos urbanos da Muribeca (PE) e coagulado com cal. O objetivo foi avaliar o uso do pó de ostra como adsorvente. Os experimentos
Eng. Sanit. Ambient.. Publicado em: 25/11/2019
-
8. EFFECT OF ALUMINUM SULFATE AND CATIONIC POLYMER ADDITION IN THE MIXED LIQUOR OF A SUBMERGED MEMBRANE BIOREACTOR (SMBR): SLUDGE CHARACTERISTICS AND ORTHOPHOSPHATE REMOVAL IN BATCH EXPERIMENTS
Abstract Submerged Membranes Bioreactors (SMBR) are an established technology for wastewater treatment for water recovery and reuse. However, its routine application is still compromised by the high energy consumption to overcome the fouling effect. This study evaluated the effect of aluminum sulfate and cationic polymer in the orthophosphate removal and slu
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
9. Kinetic Analysis of Lead Removal by Natural Hydroxyapatite from Aqueous Solution in High Concentration
The aim of this work was to study of the kinetic of Pb(II) sorption, in high lead concentration aqueous solution, by the natural hydroxyapatite (HA) and to verify whether there is a different behavior between natural and synthetic HA under different lead concentrations. Batch experiments were carried out using solutions with high lead concentration, with the
Mat. Res.. Publicado em: 30/09/2019
-
10. Optimal feeding frequency for Heros severus (Heckel, 1840), an Amazon ornamental fish
ABSTRACT The influence of feeding frequency on growth performance, batch uniformity, and survival rate of severum (Heros severus) larvae and juveniles was investigated in two experiments. In the first, 200 five-day-old severum larvae with 3.20±0.31 mg and 6.20±0.39 mm were randomly distributed into 20 aquaria (1 L) and fed 500 Artemia nauplii larvae−1 da
R. Bras. Zootec.. Publicado em: 01/08/2019
-
11. Factors and mass ratio analyses for Reactive Blue 19 dye decolorization using ozone: an experimental and analytical modelling approach
RESUMO Os corantes reduzem significativamente a penetração da luz solar no corpo d’água e, consequentemente, afetam a fotossíntese e a transferência de oxigênio. Realizaram-se modelagens experimental e analítica da remoção do azul reativo 19 por ozônio. Para isso, avaliaram-se os atributos e a taxa mássica por ensaios em batelada. A eficiência
Eng. Sanit. Ambient.. Publicado em: 30/05/2019
-
12. Encapsulating TiO2 into Polyvinyl Alcohol Coated Polyacrylonitrile Composite Beads for the Effective Removal of Methylene Blue
In this work, novel nanocomposite beads based on polyvinyl alcohol (PVA) coated polyacrylonitrile (PAN) with encapsulation of TiO2 nanoparticles (PPT) were developed successfully via a novel green synthetic method and its methylene blue (MB) removal ability by adsorption was also investigated. As-prepared nanocomposite beads were characterized by different t
J. Braz. Chem. Soc.. Publicado em: 2019-02