Bands
Mostrando 1-12 de 4241 artigos, teses e dissertações.
-
1. Synthesis of delafossite CuCrO2 via solution combustion method and its acid functionalization for biodiesel production
Abstract CuCrO2 was synthesized by solution combustion synthesis (SCS) and applied as a heterogeneous catalyst to produce soybean biodiesel. The combustion reaction was carried out using urea as a fuel, and copper (II) and chromium (III) nitrates as precursors. After the powders’ obtention, these were calcined and functionalized in an acidic medium. The po
Cerâmica. Publicado em: 2023
-
2. Characterization and variability of strains of Xanthomonas axonopodis pv. passiflorae from the state of Pará, Brazil
ABSTRACT Bacterial spot, caused by Xanthomonas axonopodis pv. passiflorae, is a disease that has limited the cultivation of passionfruit in various orchards in Brazil. The objective of this work is to characterize and evaluate the variability of 29 strains of X. axonopodis pv. passiflorae from different municipalities producing yellow passionfruit in the sta
Revista Ceres. Publicado em: 2023
-
3. Frequency Reconfigurable Near-Zero Refractive Index Material for Antenna Gain Enhancement Applications
Abstract In this paper, a planar near-zero refractive index material (NZRIM) consisting of an outer loop with four symmetrical quarter-rings is proposed. The quarter-rings are connected to the outer loop by two symmetrical microstrip lines on the opposite side. The backside of the substrate has mutually central split microstrip lines. By loading adjustable c
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Enhancement of Visible Light-Responsive Photocatalytic Efficiency by Using a Laccaic Acid-Modified Titanium Dioxide Photocatalyst
In this study, a laccaic acid-modified TiO2 photocatalyst (Lac-TiO2) was prepared via an impregnation method with 0.50, 1.00, 2.50, and 5.00 wt.% laccaic acid. The products’ physical properties were examined through X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoemission spectroscopy (XPS), UV-Vis diffused
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. A New Miniaturized Low-Profile and Stable Dual-Band FSS with 2.5D Structure for ISM Bands
Abstract Based on 2.5-Dimensional (2.5D) frequency selective surface (FSS) structures, a new miniaturized frequency selective surface structure is proposed in this work to operate as a bandreject filter in the 2.4 GHz (2400 to 2483.5 MHz) and 5 GHz (5150 to 5350 MHz and 5470 to 5725 MHz) ISM (Industrial, Scientific, and Medical) bands. The FSS has the metall
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
6. Transmission electron microscopy of pili annulati
Abstract Background: Little is known about the ultrastructure of pili annulati. Objectives: To examine with transmission electron microscopy affected hairs of a family, whose diagnosis had been confirmed in five individuals with scanning electron microscopy, which showed surface undulations with ‘‘curtain-like’’ folding of the hair cuticula and to
Anais Brasileiros de Dermatologia. Publicado em: 2022
-
7. Tuning the Photocatalytic Activity of Tin Oxide through Mechanical Surface Activation
Tin oxide (SnO2) nanoparticles were synthesized by the co-precipitation method and mechanically modified by high-energy ball milling. The experimental results demonstrate that the collision with zirconia balls produces slight changes in the crystalline, electronic, morphological, and surface properties of SnO2, which lead to an increase in the redox potentia
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. K2O SUPORTADO EM ZEÓLITA NATURAL: SÍNTESE, CARACTERIZAÇÃO E APLICAÇÃO PRODUÇÃO DE BIODIESEL A PARTIR DO ÓLEO DE GIRASSOL
Biodiesel is a renewable fuel, a substitute for fossil diesel, which is important for reducing GHG in Brazil. Therefore, this work aims to synthesize and characterize the catalyst using the support of natural zeolite impregnated with K2O and apply it in the production of biodiesel through the transesterification reaction. Through the analysis of characteriza
Química Nova. Publicado em: 2022
-
9. Postural Control in Relapsing-Remitting Multiple Sclerosis
Abstract Introduction Postural instability is considered one of the most disabling symptoms of relapsing-remitting multiple sclerosis (RRMS). Objective To evaluate postural control in patients with RRMS. Method A total of 79 individuals between 18 and 65 years old, of both genders, were distributed into an experimental group composed of patients with RRMS
International Archives of Otorhinolaryngology. Publicado em: 2022
-
10. Characterization and mechanical properties of one-part geopolymer based on a pure metakaolin
Abstract Geopolymers are amorphous silicate polymers that have been extensively studied due to their applications, scientific and technical relevance, and their potential as cement in substitution to Portland. Much of the focus has been in the use of precursors and aggregates that are rarely pure and homogeneous with the use of tailings being very common. Th
REM - International Engineering Journal. Publicado em: 2022
-
11. Complexes with Furyl-Substituted 3-Hydroxychromone: Synthesis, Characterization and Fluorescence Studies
2-(2-Furyl)-3-hydroxychromone (HL) reacts with MII ions in the formation of quadratic [Cu(L)2] (3), octahedral [M(L)2(OH2)2] (M = Co (1), Ni (2), Zn (4), Mn (5)) and seesaw [M(L)2] (M = Sn (6), Pb (7)) complexes. Recrystallization of complexes 1-3 in presence of pyridine lead to [M(L)2(py)2] (1a-3a) aducts. All compounds were characterized by Fourier transfo
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
12. Use of dynamic ballast testing equipment for analysis of rail aggregate breakdown
Abstract The granulometric range used has a direct influence on the life of the ballast layer when subjected to the load generated by rail traffic. However, in Brazil, we have only two size ranges to be used. The publications related to the subject matter under study express the need for a continuous grain size strip, different from the ones usually used in
REM, Int. Eng. J.. Publicado em: 2021-06