Axisymmetric
Mostrando 1-12 de 75 artigos, teses e dissertações.
-
1. Estudo experimental do fluxo de umidade em argamassas de cal aérea
RESUMO Uma parte significativa do património histórico construído ao redor do mundo é constituída de alvenaria estrutural, com juntas preenchidas com argamassa. Nesses sistemas estruturais, a argamassa usualmente representa uma parcela pequena/moderada do volume total da estrutura, no entanto, a argamassa é reconhecida como a principal fonte de movimen
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Numerical Study on Response Characteristics of Solid Rocket Pintle Motor
ABSTRACT: Pintle technology is currently a versatile technology used in a solid rocket motor (SRM) to control the desired thrust by changing the nozzle throat area, while effectively controlling the chamber pressure at the same time. The sudden movement of the pintle can induce rapid changes in the flow field and the occurrence of pressure oscillations insid
J. Aerosp. Technol. Manag.. Publicado em: 26/08/2019
-
3. Thermomechanical Characteristics of a Functionally Graded Mounted Uniform Disc with/without Rigid Casing
ABSTRACT In the present paper, thermomechanical attributes of a power-law graded uniform mounted disc with or without rigid casing are investigated analytically under centrifugal and steady-state thermal loads within the framework of axisymmetric infinitesimal plane-stress elasticity theory. Young's modulus, material density, thermal expansion coefficient an
J. Aerosp. Technol. Manag.. Publicado em: 13/06/2019
-
4. Leakage Resistance Envelopes of API 8 Round Casing Connections using FE Analysis
Abstract Leakage resistance of casing connections can be evaluated by extremely expensive testing procedures. Although testing is required for connection validation, significant amount of resources can be saved by complementing testing with Finite Element (FE) analysis. In this regard, a broadly accepted criterion to characterize leaks in FE simulation is st
Lat. Am. j. solids struct.. Publicado em: 21/03/2019
-
5. Study of friction stir spot welding on AA6063 aluminium alloy used in the ship building industry
ABSTRACT Friction stir spot welding (FSSW) is a novel process of metal joining. In the present work, the authors analysed the possibility of using this process to solve current problems in shipbuilding industry regarding small vessels by replacing the current arc welding techniques with the aforementioned process. Numerical simulation was carried out by the
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Penetration performance of axisymmetric U-shape-nose grooved projectile into aluminum target: Theoretical model and experiment
Abstract The penetration performance of projectiles is closely related to their nose shape as it influences the kinetic energy penetration of a rigid projectile. One new type of projectile, which is entitled U-shape-nose grooved projectile, is introduced in this study. A theoretical model, which describes the structural characterization of U-shape-nose groo
Lat. Am. j. solids struct.. Publicado em: 28/06/2018
-
7. A Parametric Study on the Centrifugal Force-Induced Stress and Displacements in Power-Law Graded Hyperbolic Discs
Abstract An extensive parametric study on the variation of the centrifugal-force-induced stress and displacements with the inhomogeneity indexes, profile parameters and boundary conditions is conducted based on the author’s recently published analytical formulas for radially functionally power-law graded rotating hyperbolic discs under axisymmetric condit
Lat. Am. j. solids struct.. Publicado em: 15/05/2018
-
8. An axisymmetric nodal averaged finite element
Abstract A nodal averaging technique which was earlier used for plane strain and three-dimensional problems is extended to include the axisymmetric one. Based on the virtual work principle, an expression for nodal force is found. In turn, a nodal force variation yields a stiffness matrix that proves to be non-symmetrical. But, cumbersome non-symmetrical ter
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
9. Numerical analysis of the liquid ejection due to the gaseous jet impact through computational fluid dynamics
Abstract Metal droplets generated by an impinging jet, play an important role in metal refining processes, mainly in oxygen steelmaking, where the droplets are ejected into the slag phase. Since the available interfacial area of droplets is very high in this process, the generated droplets enhance the rates of heat transfer and chemical reactions. Therefore,
REM, Int. Eng. J.. Publicado em: 2018-03
-
10. A Doubly Curved Axisymmetric Finite Element for Subsea Sandwich Domes
Abstract The paper focuses on the analysis of sandwich domes using a newly developed doubly curved axisymmetric sandwich finite element. The simple equivalent single layer finite element employs a cubic polynomial approximation for transverse displacement and meridional displacement. The present element accounts for the transverse shear strains of the facing
Lat. Am. j. solids struct.. Publicado em: 2016-07
-
11. Elasto-Plastic Stress Analysis in Rotating Disks and Pressure Vessels Made of Functionally Graded Materials
Abstract A new elastio-plastic stress solution in axisymmetric problems (rotating disk, cylindrical and spherical vessel) is presented. The rotating disk (cylindrical and spherical vessel) was made of a ceramic/metal functionally graded material, i.e. a particle-reinforced composite. It was assumed that the material's plastic deformation follows an isotropic
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
12. Thermo-Elastic Analysis of Clamped-Clamped Thick FGM Cylinders by Using Third-Order Shear Deformation Theory
Abstract Using the third-order shear deformation theory (TSDT), an analytical solution for deformations and stresses of axisymmetric clamped-clamped thick cylindrical shells made of functionally graded material (FGM) subjected to internal pressure and thermal loading are presented. The material properties are graded along the radial direction according to po
Lat. Am. j. solids struct.. Publicado em: 2016-04