Axial Force
Mostrando 1-12 de 101 artigos, teses e dissertações.
-
1. EXPERIMENTAL INVESTIGATION ON CONCRETE FILLED STEEL TUBULAR COLUMN TO FOUNDATION CONNECTIONS SUBJECTED TO COMBINED AXIAL AND LATERAL CYCLIC LOADING
Abstract This study focuses on performance of CFT column to foundation connections subjected to combined axial and lateral cyclic loading. Experimental investigations were carried out on five specimens with exposed column base and embedded column base connections. The parameters considered were number of stiffeners and embedment depth of CFT column. The forc
Lat. Am. j. solids struct.. Publicado em: 01/07/2019
-
2. Inelastic second-order analysis of steel columns under minor-axis bending
Abstract The inelastic second-order behavior of steel structural columns under minor-axis bending is presented in this article. To study this behavior, a nonlinear frame element formulation is adopted in which the steel's plasticity process is accompanied at the nodal points of each finite element through the refined plastic-hinge method (RPHM). A tangent mo
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
3. Effect of Semi-Apical Angle on the Crush Mechanics of Metallic Bi-Tubular Tubes under Dynamic Axial Loading
ABSTRACT Aerospace and automotive industrial advancement demands high energy absorbing structures for the human and equipement safety during transportaion and accidental emergencies. Thin-walled metallic tubes applications in the structures serve the purpose by absorbing energy during such dynamic scenarios. A new concept is presented in this study, involvin
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Optimization of reinforced concrete polygonal sections under biaxial bending with axial force
Abstract Concrete is the world’s most utilized material for production of the structural elements employed in civil construction. Due to its low tensile strength and brittle nature it is reinforced with steel bars forming the reinforced concrete (RC structure). Linear elements of reinforced concrete are commonly employed in multi-story buildings, bridges,
Lat. Am. j. solids struct.. Publicado em: 04/10/2018
-
5. Crashworthiness Performance of Stiffened Foam-filled Tapered Structures under Axial and Oblique Dynamic Loads
Abstract This paper aims to explore crashworthiness performance of new designed foam-filled tapered structures under axial and oblique impact load conditions. The structures consisted of inner and outer tapered tubes connected together by four stiffening plates. They also included square, hexagonal, octagonal, decagonal and circular cross-sectional shapes w
Lat. Am. j. solids struct.. Publicado em: 28/06/2018
-
6. A New Buffer in Impact Reduction for Aerospace Applications
Abstract The aim of this paper is to introduce a new buffering mechanism in impact reduction during assembly process of two space vehicles. Probe-cone mechanism, due to its computational easiness, is employed to study impact interaction between multibody systems. The proposed buffer with a compact structure includes a probe equipped with axial and torsional
Lat. Am. j. solids struct.. Publicado em: 14/06/2018
-
7. Numerical analysis of truss systems with stiffened flattened end-bars
Abstract Circular hollow sections are usually used in long-span roof truss systems. One of the typology for connecting elements in such structures involves the flattening of bar ends. This article presents the numerical analysis of a plane truss composed of circular hollow sections, in which diagonal bars have flattened ends. In this sense, a new flattening
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
8. A Review Paper on Looseness Detection Methods in Bolted Structures
Abstract Bolted structures are widely utilized in industrial structures and equipment due to the numerous advantages they possess. However, the use of bolts in these structures by itself can cause considerable flaws or damages. One of the major reasons of flaw in such structures is looseness. Since the looseness is initiated with a reduction in the axial for
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
9. Axial Crushing of Uni-Sectional Bi-Tubular Inner Tubes with Multiple Outer Cross-Sections
Abstract Increase of energy absorption along with smooth load displacement curve, reduced peak force and high mean crushing force is the key in the modern dynamic design of structures. In this regard, a new metallic tubular configuration consisting of uni-sectional bi-tubular inner tubes, with outer tubes of multiple varied cross-sections is proposed and cru
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
10. Quasi-Static Crushing and Energy Absorption Characteristics of Thin-Walled Cylinders with Geometric Discontinuities of Various Aspect Ratios
Abstract In this paper, energy absorption and deformation capacity of circular thin-walled members with elliptical cut-outs are investigated both numerically and experimentally. Thin-walled members possess the uniform height, thickness, average cross sectional area, material and volume are subjected to axial quasi-static loading. To conduct such tests, speci
Lat. Am. j. solids struct.. Publicado em: 2017-09
-
11. Investigation of the Energy Absorption Characteristics of Metallic Tubes with Curvy Stiffeners under Dynamic Axial Crushing
Abstract Thin walled multi-cell columns are highly efficient energy absorbers under axial compressions. Multi-cell features are usually obtained by placing stiffeners or ribs to get the required geometry features in the columns. In this study, the curved stiffeners with varying numbers in different configurations are used to support the circular single and b
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
12. Investigation of the Energy Absorption Characteristics of Metallic Tubes with Curvy Stiffeners under Dynamic Axial Crushing
Abstract Thin walled multi-cell columns are highly efficient energy absorbers under axial compressions. Multi-cell features are usually obtained by placing stiffeners or ribs to get the required geometry features in the columns. In this study, the curved stiffeners with varying numbers in different configurations are used to support the circular single and b
Lat. Am. j. solids struct.. Publicado em: 2017-08