Automobile
Mostrando 13-24 de 249 artigos, teses e dissertações.
-
13. Performance and Surface Integrity of Wire Electrical Discharge Machining of Thin Ti6al4v Plate Using Coated and Uncoated Wires
Wire Electrical Discharge Machining (WEDM) is one of the most important production technologies to manufacture very accurate small components and tools on any electrical conductive material. Titanium and its alloys have been widely used in automobile and aerospace industry as well as in medical engineering field. Small components and tools with complex geome
Mat. Res.. Publicado em: 03/06/2019
-
14. Automobile insurance in Brazil: market concentration and demand
RESUMO Este trabalho estuda dois aspectos do mercado de seguros de automóvel no Brasil: o primeiro visa determinar o grau de competitividade das empresas que o compõem e, o segundo, estimar e analisar a demanda por seguros de automóveis. A maioria de estudos no Brasil sobre o setor de seguros de automóveis versa sobre o desempenho das empresas desse seto
Rev. contab. finanç.. Publicado em: 06/05/2019
-
15. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
16. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
17. Design of the austempering heat treatment of a ductile iron differential case aided by computer simulation
Abstract Austempered ductile iron is frequently employed in the fabrication of automobile parts due to its good mechanical properties, and its simplicity and low cost of the manufacturing process. The heat treatment design is an important stage, in which parameters such as temperatures and durations are chosen according to the required microstructure, part
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
18. Crashworthiness Performance of Stiffened Foam-filled Tapered Structures under Axial and Oblique Dynamic Loads
Abstract This paper aims to explore crashworthiness performance of new designed foam-filled tapered structures under axial and oblique impact load conditions. The structures consisted of inner and outer tapered tubes connected together by four stiffening plates. They also included square, hexagonal, octagonal, decagonal and circular cross-sectional shapes w
Lat. Am. j. solids struct.. Publicado em: 28/06/2018
-
19. Susceptibility of GPS-Dependent Complex Systems to Spoofing
ABSTRACT GPS-based systems have been widely used in different critical sectors, including civilian and military applications. Despite of being able to provide great benefits, under certain circumstances they show to be highly vulnerable to intentional interferences. In this context, this article aimed to evaluate the susceptibility of different complex GPS-d
J. Aerosp. Technol. Manag.. Publicado em: 15/01/2018
-
20. Microstructural characterization of the A356 alloy in different processing routes used in the thixoforming process
ABSTRACT This work aims to evaluate different routes of raw material production to be used in thixoforming process. The semisolid materials exhibit particular structural characteristics, such the characteristic non dendritic structure. The studies for the production of near-net-shape parts have progressed together with the studies of material weight reductio
Matéria (Rio J.). Publicado em: 02/10/2017
-
21. Comparative Study of Microstructure, Texture, and Formability Between 11CrTi and 11CrTi+Nb ASTM 409 Ferritic Stainless Steel
Stabilization of ferritic stainless steel ASTM 409, for use in automobile exhaust systems, is increasingly in demand, due to higher exhaust gas temperatures. Ti is one of the most commonly used elements. However, high concentrations cause problems during steel casting; however, stabilization with Ti and Nb represents a good alternative. The present study aim
Mat. Res.. Publicado em: 31/08/2017
-
22. Effects of Solidification Rate in the Microstructure of Al-Si5Cu3 Aluminum Cast Alloy
Aluminium alloy Al-Si5Cu3 (319) is one of the most commonly used casting alloys for automobile components, due to its casting characteristics. Iron is the major impurity element that influences the detrimental β-phase formation in secondary aluminum alloys. In the present study, we investigated the influence of the cooling rate on the formation of iron comp
Mat. Res.. Publicado em: 20/07/2017
-
23. Experimental and computer thermodynamics evaluations of an Al-Si-Coating on a quenchable steel
Abstract High-strength steels are commonly used in the automobile industry in order to reduce the weight of the vehicles. However, a technical difficulty appears due to the need of hot stamping of the components, which leads to oxidation. Therefore, the application of a coating on the substrate to avoid high-temperature oxidation is used. In this work, exper
REM, Int. Eng. J.. Publicado em: 2017-03
-
24. Rollover Index for the Diagnosis of Tripped and Untripped Rollovers
Abstract It is necessary to detect danger as soon as possible to avoid rollover of a vehicle in sudden events. Using rollover index in real time can be used for this purpose. The traditional rollover indices currently applying in the vehicles can only detect the untripped rollover due to severe lateral acceleration in vehicles. These indices cannot detect th
Lat. Am. j. solids struct.. Publicado em: 2017