Automobile Industry
Mostrando 1-12 de 93 artigos, teses e dissertações.
-
1. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
RESUMO O processo de furação por escoamento produz buchas para uniões removíveis que podem ser roscadas pelo processo de rosqueamento por conformação, reduzindo etapas da produção de componentes da indústria automobilística e em galpões da construção civil. Aços de alta resistência e baixa liga (ARBL) são empregados em variadas aplicações n
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
ABSTRACT Flow drilling process produces bushes for removable joints that can be threaded by forming tapping process, reducing stages in production of components of automobile industry and in construction sheds. High strength and low alloy steels (HSLA) are employed on several applications in the processing industry. Benefits provided by these materials make
Matéria (Rio J.). Publicado em: 10/06/2019
-
3. Performance and Surface Integrity of Wire Electrical Discharge Machining of Thin Ti6al4v Plate Using Coated and Uncoated Wires
Wire Electrical Discharge Machining (WEDM) is one of the most important production technologies to manufacture very accurate small components and tools on any electrical conductive material. Titanium and its alloys have been widely used in automobile and aerospace industry as well as in medical engineering field. Small components and tools with complex geome
Mat. Res.. Publicado em: 03/06/2019
-
4. Automobile insurance in Brazil: market concentration and demand
RESUMO Este trabalho estuda dois aspectos do mercado de seguros de automóvel no Brasil: o primeiro visa determinar o grau de competitividade das empresas que o compõem e, o segundo, estimar e analisar a demanda por seguros de automóveis. A maioria de estudos no Brasil sobre o setor de seguros de automóveis versa sobre o desempenho das empresas desse seto
Rev. contab. finanç.. Publicado em: 06/05/2019
-
5. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
6. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Experimental and computer thermodynamics evaluations of an Al-Si-Coating on a quenchable steel
Abstract High-strength steels are commonly used in the automobile industry in order to reduce the weight of the vehicles. However, a technical difficulty appears due to the need of hot stamping of the components, which leads to oxidation. Therefore, the application of a coating on the substrate to avoid high-temperature oxidation is used. In this work, exper
REM, Int. Eng. J.. Publicado em: 2017-03
-
8. Experimental Study of Tensile Test in Resistance Spot Welding Process
Abstract Resistance spot welding (RSW) is a widely used joining process for fabricating sheet metal assemblies in automobile industry .In comparison with other welding processes the RSW is faster and easier for automation. This process involves electrical, thermal and mechanical interactions. Resistance spot welding primarily takes place by localized melting
Lat. Am. j. solids struct.. Publicado em: 2016-06
-
9. Multi objective optimization of foam-filled circular tubes for quasi-static and dynamic responses
AbstractFuel consumption and safety are currently key aspects in automobile design. The foam-filled thin-walled aluminium tube represents a potentially effective material for use in the automotive industry, due to its energy absorption capability and light weight. Multi-objective crashworthiness design optimization for foam-filled double cylindrical tubes is
Lat. Am. j. solids struct.. Publicado em: 2015-06
-
10. Velocidad de corrosión de una aleación base plomo en una solución de ácido sulfúrico a diferentes temperaturas
Car batteries are not only affected by their use and wear but also by other factors such as electrolyte concentration, water loss and temperature that can be exposed, the latter being the most influential factor causing an increase in the corrosion rate of lead alloys (battery components), and affecting their service time. Therefore, for the industry of auto
Matéria (Rio J.). Publicado em: 2014-06
-
11. Study of mechanical properties and durability of magnesium phosphate cement matrix containing grinding dust
The acid-base cements are materials developed by means of reactions between an acid component and another basic one. This type cement belongs to the family of the so called "chemically bonded phosphate ceramics" (CBPCs), new types of inorganic materials that have special physico-chemical properties and that, in contrast to most advanced ceramics, are made by
Mat. Res.. Publicado em: 02/07/2013
-
12. Tendências recentes do emprego na indústria automobilística paulista / Recent employment trends in the Paulista Automotive Industry
O presente estudo se propõe a realizar uma análise da evolução do emprego no setor automobilístico no Estado de São Paulo na década de 2000, enfatizando os impactos da recente crise econômica. Em um primeiro momento, realiza um esforço para compreender questões referentes às transformações estruturais do setor, em especial aquelas que interferem
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2012