Automation System
Mostrando 1-12 de 253 artigos, teses e dissertações.
-
1. Use of Arduino in the Development of a New and Fast Automated Online Preconcentration System Based on Double-Knotted Reactor for the Mn Determination in Tea Samples by Flame Atomic Absorption Spectrometry (F AAS)
In the present paper, an automated online preconcentration system based on the use of two knotted reactors (KR) was developed for Mn determination in tea samples by flame atomic absorption spectrometry (F AAS). The system automation was performed by using four solenoid valves to switch sample streams and reagents. Valves were driven electronically by an inte
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
2. TRANSINDIVIDUALITY AND POST-LABOR BASED ON SIMONDON AND STIEGLER
RESUMO O objetivo deste artigo é elucidar a base filosófica do paradigma pós-laboral por meio da cultura técnica-psiquica-coletiva transindividual de Gilbert Simondon e Bernard Stiegler. Simondon prediz que o problema da alienação laboral surgido da industrialização mecânica pode ser vencido mediante a expansão da cultura técnica pós-industrial b
Kriterion. Publicado em: 29/08/2019
-
3. Fuzzy logic in automation for interpretation of adaptability and stability in plant breeding studies
ABSTRACT: The methods of Annicchiarico (1992) and Cruz et al. (1989) are widely used in phenotypic adaptability and stability analyses in plant breeding. In spite of the importance of these methodologies, their parameters are difficult to interpret. The aim of this research was to develop fuzzy controllers to automate the decision-making process employed by
Sci. agric. (Piracicaba, Braz.). Publicado em: 2019-04
-
4. Automation of lettuce seedlings irrigation with sensors deployed in the substrate or at the atmosphere
ABSTRACT: Seedling production is an important step in the lettuce production system. However, there is a tendency to apply excessive irrigation at this stage. The aim of this study was to test the use of the Simplified Irrigation Controller (SIC) under two conditions: first, with the sensor installed in the substrate (measuring the soil water tension) and se
Sci. agric. (Piracicaba, Braz.). Publicado em: 2019-04
-
5. Production of fibrous polymer scaffolds for tissue engineering using an automated solution blow spinning system
Abstract Introduction Solution blow spinning (SBS) and airbrushing are two techniques that can be used as alternatives to electrospinning in the production of fibrous scaffolds for tissue engineering (TE). SBS seems particularly interesting due to its versatility, however, it has not been much explored and no automated SBS systems were found in the literat
Res. Biomed. Eng.. Publicado em: 22/10/2018
-
6. Geological modeling of a stratified deposit with CAD-Based solid model automation
Abstract The planning stages of mining activities require many comprehensive and detailed analyses. Determining the correct orebody model is the first stage and one of the most important. Three-dimensional solid modeling is one of the significant methods that can examine the position and shape of the ore deposit. Although there are many different types of mi
REM, Int. Eng. J.. Publicado em: 2017-09
-
7. LOW-COST AUTOMATION OF FERTIGATION WITH PROGRAMMABLE LOGIC CONTROLLER AND GAS-FILLED SENSORS
ABSTRACT The aim of this study was to develop and evaluate a low-cost automation system for management of different fertigation regimes in tomato plants (Solanum lycopersicum L.) grown in a protected environment. The system consisted of an irrigation controller coupled to substrate moisture sensors and to a programmable logic controller (PLC). Four water reg
Eng. Agríc.. Publicado em: 2017-04
-
8. LOW COST FUZZY SYSTEM APPLIED TO THE CONTROL AND SUPERVISION OF THERMAL ENVIRONMENT IN POULTRY FARMS
ABSTRACT The aim of this study was to develop an automated fuzzy controller with microcontroller, consisting of hardware and software for the control and supervision of thermal environment in broiler farms. The study has been conducted in two steps: in the first one it was performed a computer analysis through simulation. In the second step it was performed
Eng. Agríc.. Publicado em: 2017-02
-
9. Actitudes docentes hacia los ejercicios de la Prueba de Acceso a la Universidad informatizada
Abstract This article stems from research carried out within the Paulex Universitas Project in order to gather relevant information regarding 2nd year baccalaureate professors’ preferences in terms of exercise typology with a view to analysing the feasibility of implementing a computer-based foreign language exam within the University Entrance Examination
Educ. Pesqui.. Publicado em: 12/01/2017
-
10. PRO-ELICERE: A Hazard Analysis Automation Process Applied to Space Systems
ABSTRACT In the last decades, critical systems have increasingly been developed using computers and software even in space area, where the project approach is usually very conservative. In the projects of rockets, satellites and its facilities, like ground support systems, simulators, among other critical operations for the space mission, it must be applied
J. Aerosp. Technol. Manag.. Publicado em: 2016-09
-
11. LOW COST ANALYZER FOR THE DETERMINATION OF PHOSPHORUS BASED ON OPEN-SOURCE HARDWARE AND PULSED FLOWS
The need for automated analyzers for industrial and environmental samples has triggered the research for new and cost-effective strategies of automation and control of analytical systems. The widespread availability of open-source hardware together with novel analytical methods based on pulsed flows have opened the possibility of implementing standalone auto
Quím. Nova. Publicado em: 2016-04
-
12. Técnicas de profiling para o co-projeto de hardware e software baseado em computação reconfigurável aplicadas ao processador softcore Nios II da Altera / Hardware and software codesing profiling techniques based on reconfigurable computing applied to the Altera´s Nios soft core processor
Como avanço dos paradigmas de desenvolvimento de sistemas eletrônicos, novos conceitos, modelos e técnicas resultaram dessa evolução, gerando ferramentas mais eficientes e objetivas. Entre estas, as de automação de projetos eletrônicos (EDA - Electronic Design Automation) em nível de sistema (ESL - Electronic System Level) trouxeram um incremento co
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/09/2012