Atomic Force Microscope
Mostrando 1-12 de 127 artigos, teses e dissertações.
-
1. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
2. Analysis of Styrene Polymerization Without Surfactant and N2 Gas in Cylindrical Flask.
The conditions of chemical synthesis can be crucial for polymerization of styrene in such a way that it can be produced latex beads at nanometric range (ϕ < 400nm). In this work, it will be analyzed how the absence of N2 and surfactant will result in colloidal particles with high affinity to agglomerate forming two kinds of nanostructured assemblies: colloi
Mat. Res.. Publicado em: 22/01/2018
-
3. Surface, thermal and hemocompatible properties of novel single stage electrospun nanocomposites comprising polyurethane blended with bio oilTM
ABSTRACT In this work, the physicochemical and blood compatibility properties of prepared PU/Bio oil nanocomposites were investigated. Scanning electron microscope (SEM) studies revealed the reduction of mean fiber diameter (709 ± 211 nm) compared to the pristine PU (969 nm ± 217 nm). Fourier transform infrared spectroscopy (FTIR) analysis exposed the char
An. Acad. Bras. Ciênc.. Publicado em: 26/10/2017
-
4. Influence of Anodization Parameters in the TiO2 Nanotubes Formation on Ti-7.5Mo Alloy Surface for Biomedical Application
In this study, the effects of the parameters such as applied potential difference, time and annealing temperature in the titania nanotubes formation were evaluated. The morphology of the nanotubes was evaluted by using Field Emission Gun - Scanning Electron Microscope (FEG-SEM), Atomic Force Microscope (AFM), contact angle and X-rays diffraction (XRD). Self-
Mat. Res.. Publicado em: 24/07/2017
-
5. The correlation between tribological properties of nanostructure TiN coatings and deposition process parameters in PACVD system
ABSTRACT Titanium base coatings are being used extensively for improving wear characteristics at the surface of different parts. Titanium nitride was deposited by Plasma Assisted Chemical Vapor Deposition (PACVD) techniques with purpose improve interface with substrate, as this can increase wearing of the entire part in spite of desirable wear behavior of Ti
Matéria (Rio J.). Publicado em: 22/06/2017
-
6. Biosensor Based on Cysteine Monolayer and Monoclonal Antibody for Specific Detection of Aflatoxin B1 in Rice
An electrochemical immunosensor for detection of aflatoxin B1 (AFB1) in food samples was developed. The sensor is composed by cysteine monolayer immobilized on gold electrode surface with subsequent bind to monoclonal antibody (MAb-Cys-modified electrode). The AFB1 detection was evaluated by cyclic voltammetry and impedance spectroscopy in the frequency rang
J. Braz. Chem. Soc.. Publicado em: 2016-06
-
7. Producing BiI/BiOI Thin Films via Chemical Bath Deposition
In this paper, we tried to describe a different method for producing BiI and BiOI thin films, which is chemical bath deposition on glass substrates. Structural and optical properties of BiI and BiOI thin films were examined using X-ray diffraction (XRD), scanning electron microscope (SEM), and UV-VIS measurements. Film thicknesses of the films were measured
Mat. Res.. Publicado em: 16/02/2016
-
8. Poly(3-octylthiophene)/stearic Acid Langmuir and Langmuir-Blodgett films: Preparation and characterization
A study is reported on Langmuir and Langmuir-Blodgett (LB) films obtained by adding different percentages of stearic acid (SA) to poly(3-octylhiophene) (P3OT). Surface pressure - mean molecular area (π - A) isotherms, ultraviolet-visible (UV-Vis) absorption spectrum, atomic force microscope (AFM) and dc electrical measurements have been used for characteriz
Mat. Res.. Publicado em: 2014-12
-
9. Nonlinear mathematical modeling of vibrating motion of nanomechanical cantilever active probe
Nonlinear vibration response of nanomechanical cantilever (NMC) active probes in atomic force microscope (AFM) application has been studied in the amplitude mode. Piezoelectric layer is placed piecewise and as an actuator on NMC. Continuous beam model has been chosen for analysis with regard to the geometric discontinuities of piezoelectric layer attachment
Lat. Am. j. solids struct.. Publicado em: 2014-05
-
10. Caracterização térmica e estrutural de pós e filmes finos de BaTiO3 sintetizados via método Pechini / Thermal and structural characterization of powders and thin films of BaTiO3 synthesized by Pechini method
Amorphous oxides are chemical compositions whose atomic or molecular configuration does not follow a periodicity like it happens with crystals, which are essentially constituted by oxygen atoms, which has to be the most electronegative element, and other elements. The barium titanate (BaTiO3), amorphous oxide obtained through this work has tetragonal structu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
11. Studies of optical, morphological and electrical properties of POMA/PMMA blends, using two different levels of doping with CSA
Poly(o-methoxyaniline) (POMA) was synthesized by oxidative polymerization of the monomer o-methoxyaniline. POMA/poly(methyl methacrylate) (PMMA) blends were produced by dissolving both polymers in chloroform (CHCl3).The amount of camphor sulfonic acid (CSA) used as dopant of POMA was different, providing two methods for preparation of the blends. Solutions w
Polímeros. Publicado em: 14/08/2012
-
12. Domínios ferroelétricos em cerâmicas e materiais nanoestruturados: investigação por microscopia de piezoresposta
In this work, ferroelectric domain structure was investigated by Piezoresponse Force Microscopy (PFM). To this, an Atomic Force Microscope (AFM) has been modified to use it as PFM at room temperature and at high temperatures. Ferroelectric ceramics were used in the as bulk ceramic samples of Pb(Zr0,40Ti0,60)O3 (PZT 40/60) and (Pb0,79La0,21)TiO3 (PLT 21) prod
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/12/2011