Utilização de quitina e mordente na remoção do corante preto Remazol B por adsorção / Use of chitin and mordant in the removal of Remazol black B dye by adsorption

AUTOR(ES)
FONTE

IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia

DATA DE PUBLICAÇÃO

31/05/2012

RESUMO

In this work was investigate the physical-chemical treatment for the removal Remazol Black B dye reagent by adsorption using chitin isolated from industrial waste (exoskeleton shrimp). The extraction of chitin was made from industrial waste of shrimp (exoskeleton of shrimp) in the decolorization treatment with NaClO, followed by deproteinization of alkali solution at temperature of 1000C, and freeze dried. The chitin were separated by granulometry corresponding to fraction mesh 16. The removal process of Remazol Black B dye was used a new method applying the technique of adsorption with subsequent ligation with inorganic and organic mordants solutions, in order to enhance and improve the fixing of dye hydrolyzate. A two -level of factorial design was employed to analyze the influence of stirring speed, the pH, and temperature in adsorption system containing a finite bath synthetic solution of Remazol Black B dye, operating in pressure system. In the experiments, the volume of the bath and the amount of the adsorbent were kept constant agitation. The ranges of speeds were planned in low medium and higher agitation in water bath. The results showed that the adsorption carried out at elevate temperature has a better efficiency in dyeing, but also the bath pH3.0. The product formed by complexation Remazol Black B and chitin was separated from the solution by decantation, and the amount of the dye do not adsorbed was determined by UV-Vis spectrophometer using a calibration curve in colorant at 597nm. The assays 11 and 13, respectively, indicated absorbance at ? = 597 nm zero, suggesting adsorption efficiency of the dyes takes place in acid médium, and other factors such as time, temperature and speed (rpm) do not directly influenced the process. The operation after dyeing called polishing definitively determine the final result of adsorption, where the use of aluminium sulphate solution at 2%, promoted greater adherence allowed hydrolyzate of the reactive dye in the bath and chitin, suggesting the new proposed physical-chemical treatment to removal dyes pigments from textile effluent, and showed low cost, beyond that generate similar to a non-woven.

ASSUNTO(S)

meio ambiente indústria têxtil corantes environment textile industries dyes

ACESSO AO ARTIGO

Documentos Relacionados