Synthesis and Microstructural Characterization of SnO2:F Thin Films Deposited by AACVD
AUTOR(ES)
Chavarría-Castillo, Karen Alejandra, Amézaga-Madrid, Patricia, Esquivel-Pereyra, Oswaldo, Antúnez-Flores, Wilber, Pizá Ruiz, Pedro, Miki-Yoshida, Mario
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
31/10/2016
RESUMO
In this work, we report the synthesis and microstructural characterization of Tin oxide thin films doped with fluorine for applications such as transparent conductive oxides. Tin oxide doped with fluorine thin films were deposited by aerosol assisted chemical vapor deposition technique onto a borosilicate glass substrate, using a precursor solution of stannic chloride in ethanol and ammonium fluoride as the dopant. Deposition temperature was varied between 623-773 K. Also, other deposition parameters such as concentration of the precursor solution and gas carrier flux were fixed at 0.1 mol∙dm-3 and 5 L min-1 respectively. Results indicate the presence of only the cassiterite phase of Tin oxide in all samples. Thin films obtained were characterized by X-Ray Diffraction. Surface morphology and microstructure were studied by field emission scanning electron microscopy, optical properties of samples were analyzed by total transmittance and reflectance spectra. The resistivity value of the films was measured by the sheet resistance.
Documentos Relacionados
- Synthesis and characterization of highly transparent and conductive SnO2:F and In2O3:Sn thin films deposited by spray pyrolysis
- Sb doping effects and oxygen adsorption in SnO2 thin films deposited via sol-gel
- Synthesis and characterization of nanostructured TiO2 and TiO2/W thin films deposited by co-sputtering
- Influence of pH of colloidal suspension on the electrical conductivity of SnO2 thin films deposited via Sol-Gel-Dip-Coating
- Heterojunction between Al2O3 and SnO2 thin films for application in transparent FET