Surfactants effects on the solid state nitric oxide sensor prepared by Sol-Gel process / Efeito dos sulfactantes sobre o sensor sólido de óxido nítrico preparado pelo processo Sol-Gel

AUTOR(ES)
DATA DE PUBLICAÇÃO

2009

RESUMO

In previous work we present a solid sensor for nitric oxide (NO) prepared by sol-gel method using the trapped complex of Fe 2+ -DETC. In this work, we report the effect of some surfactants (CTAB, cationic, anionic, SDS, Triton-X100 and neutral pluronic F127) on the sensor. The electron paramagnetic resonance (EPR) was used to quantify the number of molecules of NO-Fe 2+ -DETC. The use of surfactant increases the mechanical strength of solid sensors, being more pronounced in sensors containing CTAB and Triton. Without the surfactant no EPR signal of the complex NO-Fe 2+ -DETC was observed. The drying time was optimized to 30 min. The strongest EPR signal was obtained with the sensors containing the surfactant to 12 mM. The surfactants in general increase the amount of NO trapped. The diffusion of NO was estimated by the time of trapping of the NO that it was higher in the presence of F127 and SDS. The signal saturation of the NO sensors occurs in 10 min. A higher mobility of the complex NO-Fe 2+ -DETC was found in sensors containing SDS and F127 and was estimated by lineshapes. For the solid state sensors the detection limit was 2 µM using the F127 as additive and for the SDS, CTAB and Triton the limit was 6 µM, 8 µM and 10 µM respectively. In the colloidal solution the least amount detected was 0.1 µM also with the F127. The sensitivity of the sensors increases at least 5 times in the solid sensors prepared with the F127 in detriment to the other and can be improved by using mixed surfactants.

ASSUNTO(S)

biossensores óxido nítrico sol gel biosensors surfactants. sol gel rpe surfactantes. nitric oxide epr

ACESSO AO ARTIGO

Documentos Relacionados