Surface acoustic wave propagation in Y- and Z-cut 0.67PbMgNbO3–0.33PbTiO3 single crystals
AUTOR(ES)
Li, Xiuming
FONTE
American Institute of Physics
RESUMO
Surface acoustic wave (SAW) propogation in Y-cut and Z-cut relaxor-based 0.67Pb(Mg1∕3Nb2∕3)O3–0.33PbTiO3 (PMN-33%PT) ferroelectric single crystals poled along [001]c cubic direction has been analyzed theoretically. Characteristic curves were obtained for the phase velocity, electromechanical coupling coefficient and PFA of SAW in Y-cut and Z-cut PMN-33%PT single crystals. It was found that the phase velocity is lower, while the electromechanical coupling coefficient is much higher, than that of traditional piezoelectric materials. The power flow angle (PFA) can be zero in certain directions, which makes this crystal system a promising material for future SAW devices with smaller size and enhanced performance. The directions near 45° and 135° of Y-cut PMN-33%PT crystals are found to be optimum directions for SAW device applications.
ACESSO AO ARTIGO
http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2766398Documentos Relacionados
- Multiple matching scheme for broadband 0.72Pb(Mg1∕3Nb2∕3)O3−0.28PbTiO3 single crystal phased-array transducer
- Monoclinic MB phase and phase instability in [110] field cooled Pb(Zn1∕3Nb2∕3)O3–4.5%PbTiO3 single crystals
- Temperature coefficient of piezoelectric constants in Pb(Mg1/3 Nb2/3)O3 - PbTiO3 ceramics
- Complete set of material constants of Pb(In1∕2Nb1∕2)O3–Pb(Mg1∕3Nb2∕3)O3–PbTiO3single crystal with morphotropic phase boundary composition
- Avaliação do módulo elástico de cerâmicas magnetoelétricas de 0,6BiFeO3-0,4PbTiO3 dopadas com La
