Simulating a Multi-Vehicle Traffic Sensing System Based on Radio Tomographic Imaging

AUTOR(ES)

Wilkens, Jarmo T., Silva, Jair A., Garcia, Anilton S.

FONTE

J. Microw. Optoelectron. Electromagn. Appl.

DATA DE PUBLICAÇÃO

2016-12

RESUMO

Abstract One of the most recently developed wireless technologies is Radio Tomographic Imaging (RTI). RTI employs a wireless sensor network that produces images of the change in the electromagnetic field of a monitored area using Received Signal Strength (RSS) measurements. This allows the tracking of device-free objects such as humans and cars. This paper is the first to propose and validate a simulation model that simulates RSS measurements for arbitrary RTI networks, based on the ZigBee communication protocol. The simulation model allows the specification of an RTI network from the ground up, including node positions, network size and geometry and RSS measurement processing. Furthermore, this paper demonstrates the implementation of the simulation model to an enhancement of a recently proposed RTI system, which acts as a roadside surveillance system. The enhancement includes three newly proposed techniques, namely a new weight matrix calculation method, a new node spacing setup and a new vehicle detection method. The simulation results indicate that it is possible to detect both one or two family sized cars simultaneously. Using techniques that reduce RSS variance due to multipath effects and the newly proposed methods, simulated vehicle detection performance is demonstrated to be between 95% and 100%.

Documentos Relacionados

• MULTI-VEHICLE COVERING TOUR PROBLEM: BUILDING ROUTES FOR URBAN PATROLLING
• Network Characteristics Analysis of Air Traffic Management Technical Support System Based on Multi-source Weighting
• Multi-Disciplinary System Design Optimization of a Launch Vehicle Upper-Stage
• EXTREMAL PRINCIPLES FOR SIMULATING TRAFFIC FLOW IN A NETWORK*
• On mechanical vibration analysis of a multi degree of freedom system based on arduino and MEMS accelerometers