Production and characterization of granular activated carbon from activated sludge
AUTOR(ES)
Al-Qodah, Z., Shawabkah, R.
FONTE
Brazilian Journal of Chemical Engineering
DATA DE PUBLICAÇÃO
2009-03
RESUMO
In this study, activated sludge was used as a precursor to prepare activated carbon using sulfuric acid as a chemical activation agent. The effect of preparation conditions on the produced activated carbon characteristics as an adsorbent was investigated. The results indicate that the produced activated carbon has a highly porous structure and a specific surface area of 580 m²/g. The FT-IR analysis depicts the presence of a variety of functional groups which explain its improved adsorption behavior against pesticides. The XRD analysis reveals that the produced activated carbon has low content of inorganic constituents compared with the precursor. The adsorption isotherm data were fitted to three adsorption isotherm models and found to closely fit the BET model with R² equal 0.948 at pH 3, indicating a multilayer of pesticide adsorption. The maximum loading capacity of the produced activated carbon was 110 mg pesticides/g adsorbent and was obtained at this pH value. This maximum loading was found experimentally to steeply decrease as the solution pH increases. The obtained results show that activated sludge is a promising low cost precursor for the production of activated carbon.
Documentos Relacionados
- Production and Characterization of Activated Carbon Fiber from Textile PAN Fiber
- Biomethane production from vinasse in upflow anaerobic sludge blanket reactors inoculated with granular sludge
- Degradation and Fate of Carbon Tetrachloride in Unadapted Methanogenic Granular Sludge
- Growth and persistence of pathogens on granular activated carbon filters.
- Disinfection of bacteria attached to granular activated carbon.