Processamento viscoplástico e conformação cerâmica por rolos a frio a partir de suspensões concentradas de alumina. / Viscoplastic processing, and roll pressing, of ceramic bodies by concentrated alumina suspensions.

AUTOR(ES)

Arturo Rodrigo Ferreira Pardo

DATA DE PUBLICAÇÃO

2005

RESUMO

Plastic forming, followed by roll-pressing, allows to shape ceramic bodies with thickness that are useful for electronic and pavement ceramics. This work introduces an alternative route to processing ceramic plastic mixes. The first step comprehended the selection of suitable raw materials with the aim of assure the best packing of particles, followed by decreased porosity and water consumption. Theoretical porosity of distinct calcined alumina was calculated with data obtained by measuring some properties of the raw materials: density (picnometry), specific surface area and particle size determination by the sedimentation technique. Deflocculants with distinct molecular design and plasticizer adequate to the route proposed were selected. The proposed route involved processing a ceramic suspension as most concentrated as possible with pseudo plastic rheological behavior. This behavior was determined by viscosimetry of the suspension. Alumina plastic mix was processed by mixing an alumina suspension using a mechanical mixer, followed by adding the plasticizer with a helix mixer and finally became homogeneous by knife milling. Drying and firing settings were chosen with the aim of avoid thermal stresses that would damage the ceramic bodies. Rheological behavior of plastic mixes was also measured. Physical, mechanical and microestrutural characteristics of the ceramic bodies were also measured after roll forming. The influence of some processing parameters was also evaluated: roll velocity, thickness of the ceramic bodies and de-airing of plastic mix. Results allowed deducing that viscoplastic processing is an interesting alternative, low cost one, of forming ceramic substrates with low water (12% wt) and organic additive (2% wt) content.

ASSUNTO(S)

alumina processamento cerâmico conformação plástica crâmica ceramica viscoplástico

Documentos Relacionados

• Viscoplastic conformation by cold roll pressing and characterization of alumina substrats
• Estudo da conformação de substratos cerâmicos por laminação a partir de suspensões concentradas de alumina
• Adição de grafite na conformação de substratos cerâmicos porosos processados por rolos a frio
• Singularities related to the electrosteric stabilization mechanism and their effects over the rheological behaviour of concentrated suspensions.
• Influência do coeficiente de atrito entre os agregados e da viscosidade da matriz no comportamento reológico suspensões concentradas heterogêneas.