Preparation of budesonide and budesonide-PLA microparticles using supercritical fluid precipitation technology

AUTOR(ES)
FONTE

Springer-Verlag

RESUMO

The objective of this study was to prepare and characterize microparticles of budesonide alone and budesonide and polylactic acid (PLA) using supercritical fluid (SCF) technology. A precipitation with a compressed antisolvent (PCA) technique employing supercritical CO2 and a nozzle with 100-μm internal diameter was used to prepare microparticles of budesonide and budesonide-PLA. The effect of various operating variables (temperature and pressure of CO2 and flow rates of drug-polymer solution and/or CO2) and formulation variables (0.25%, 0.5%, and 1% budesonide in methylene chloride) on the morphology and size distribution of the microparticles was determined using scanning electron microscopy. In addition, budesonide-PLA particles were characterized for their surface charge and drug-polymer interactions using a zeta meter and differential scanning calorimetry (DSC), respectively. Furthermore, in vitro budesonide release from budesonide-PLA microparticles was determined at 37°C. Using the PCA process, budesonide and budesonide-PLA microparticles with mean diameters of 1 to 2 μm were prepared. An increase in budesonide concentration (0.25%–1% wt/vol) resulted in budesonide microparticles that were fairly spherical and less aggiomerated. In addition, the size of the microparticles increased with an increase in the drug-polymer solution flow rate (1.4–4.7 mL/min) or with a decrease in the CO2 flow rate (50–10 mL/min). Budesonide-PLA microparticles had a drug loading of 7.94%, equivalent to ∼80% encapsulation efficiency. Budesonide-PLA microparticles had a zeta potential of— 37±4 mV, and DSC studies indicated that SCF processing of budesonide-PLA microparticles resulted in the loss of budesonide crystallinity. Finally, in vitro drug release studies at 37°C indicated 50% budesonide release from the budesonide-PLA microparticles at the end of 28 days. Thus, the PCA process was successful in producing budesonide and budesonide-PLA microparticles. In addition, budesonide-PLA microparticles sustained budesonide release for 4 weeks.

ACESSO AO ARTIGO

Documentos Relacionados