Oxide Formation on NiTi Surface: Influence of the Heat Treatment Time to Achieve the Shape Memory
AUTOR(ES)
Hansen, Alana Witt, Beltrami, Lilian Vanessa Rossa, Antonini, Leonardo Marasca, Villarinho, Denis Jardim, Neves, Julio Cesar Klein das, Marino, Cláudia Eliana Bruno, Malfatti, Célia de Fraga
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
2015-10
RESUMO
AbstractSeveral studies regarding superficial treatments of Nitinol (NiTi) shape-memory have been developed aiming to the improve corrosion resistance and to block the Ni release to adjacent tissues. The necessary heat treatment to achieve the shape memory effect normally occurs at temperatures between 500 and 600 °C. However, titanium oxide (TiO2) is formed on the NiTi surface during the shape memory process heat treatment. In this work the effects of the heat treatment time on the surface characteristics of the formed NiTi oxide, at temperatures that promote the shape-memory (530 and 570 °C), were evaluated. The TiO2 layers which were obtained were evaluated by X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning electron microscope (SEM), thermogravimetric analysis (TGA), wettability and roughness. The results show that by increasing the exposure time at the temperature of 570 °C the formation of a thicker oxide is promoted, with less superficial roughness and of a hydrophobic nature. According to the literature, these characteristics indicate that the obtained oxide layer has properties that accelerat the osseointegration process.
Documentos Relacionados
- ECAE processed NiTi shape memory alloy
- Surface Characterization of NiTi Superelastic and Shape Memory Alloys After Electrolytic Polishing
- Mechanical properties of NiTi and CuNiTi shape-memory wires used in orthodontic treatment. Part 1: stress-strain tests
- Low carbon content NiTi shape memory alloy produced by electron beam melting
- Mechanical properties of NiTi and CuNiTi wires used in orthodontic treatment. Part 2: Microscopic surface appraisal and metallurgical characteristics