Obtaining by laser treatment and characterization of superface composite on cast duplex stainless steels / Obtenção por tratamento a laser e caracterização de composito superficial em aços inoxidaveis duplex fundidos
AUTOR(ES)
Alex Maia do Nascimento
DATA DE PUBLICAÇÃO
2007
RESUMO
In this work was studied the orientation relations between austenite and ferrite in three cast duplex stainless steels, ASTM A890 1A, 3A, 6A on solution treatment. After that, simple laser surface remelting (LR) and laser melt injection (LMI) treatments were carried out on the alloys. The microstructural changes and the effects of laser treatments on hardness, wear resistance and corrosion resistance properties were analyzed. The microstructural changes were investigated by means of optical microscopy, scanning electron microscopy with integrated EDS and EBSD systems, X-ray diffraction and Vickers microhardness. The wear properties were measured by pin-on-disc tests on the three alloys in all different conditions : initial, LR and LMI. In order to analyze the corrosive behavior of the alloys before and after the treatments, polarization tests were carried out in the 0,5M de H2SO4 + 0,5M de NaCl solution at room temperature. The results obtained showed that the austenite and ferrite of alloys in the initial condition have orientation relations close to Greninger-Troiano, Kurdjumov-Sachs and Bain theoritical models. However, the laser treated surfaces showed accentuated microstructural changes and the microhardness and wear resistance were increased in comparing with the wear of the substrate. The three alloys in all conditions showed an excellent corrosion resistance what it is typical for the duplex stainless steels
ASSUNTO(S)
aço inoxidavel - corrosão cast duplex stainless materiais a laser aço inoxidavel fusão a laser laser surface treatment microestrutura desgaste mecanico wear and corrosion
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=vtls000445755Documentos Relacionados
- Efeito da adição de nitrogênio e da temperatura de solubilização nas propriedades mecânicas de aços inoxidáveis duplex fundidos
- Influencia de tratamentos superficiais a laser em aços inoxidaveis utilizados em instrumentais cirurgicos
- Microestructurals changes and corrosion resistance of the duplex stainless steel after laser surface remelting
- Tratamento superficial por refusão a laser em aços AISI H13 e AISI 420
- Mechanical properties of cast CA15 and CA6NM stainless steels