Nanocellulose Produced from Rice Hulls and its Effect on the Properties of Biodegradable Starch Films
AUTOR(ES)
Nascimento, Pedro, Marim, Renan, Carvalho, Gizilene, Mali, Suzana
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
12/02/2016
RESUMO
Rice hull is a residue from agro-industry that can be used to produce nanocellulose. We produced nanocellulose from rice hulls through bleaching (with a 5% NaOH solution followed by a peracetic acid solution) and acid hydrolysis at a mild temperature (45ºC) followed by ultrasonication. We investigated the microstructure, crystallinity and thermal stability of these materials and studied their effects on the properties of starch films. After bleaching, the compact structure around the cellulosic fibers was removed, and the lignin content of the residue decreased from 7.22 to 4.22%. The obtained nanocellulose presented a higher crystallinity (up 70%), higher thermal stability than the raw material and lignin contents below 0.35%. The nanocellulose formed interconnected webs of tiny fibers (< 100 nm in diameter), which decreased the opacity, water vapor permeability and improved the mechanical properties when added as reinforcement in the starch films.
Documentos Relacionados
- Biodegradable films made from raw and acetylated cassava starch
- Microstructure and thermal and functional properties of biodegradable films produced using zein
- Starch/polyester films: simultaneous optimisation of the properties for the production of biodegradable plastic bags
- Effect of rice variety and milling fraction on the starch gelatinization and rheological properties of rice milk
- Effect of the degree of acetylation, plasticizer concentration and relative humidity on cassava starch films properties