MODELING STYRENE HYDROGENATION KINETICS USING PALLADIUM CATALYSTS

AUTOR(ES)

Justino, G. T., Vale, C. S. A., Silva, M. A. P. da, Secchi, A. R.

FONTE

Braz. J. Chem. Eng.

DATA DE PUBLICAÇÃO

2016-09

RESUMO

Abstract The high octane number of pyrolysis gasoline (PYGAS) explains its insertion in the gasoline pool. However, its use is troublesome due to the presence of gum-forming chemicals which, in turn, can be removed via hydrogenation. The use of Langmuir-Hinshelwood kinetic models was evaluated for hydrogenation of styrene, a typical gum monomer, using Pd/9%Nb2O5-Al2O3 as catalyst. Kinetic models accounting for hydrogen dissociative and non-dissociative adsorption were considered. The availability of one or two kinds of catalytic sites was analyzed. Experiments were carried out in a semi-batch reactor at constant temperature and pressure in the absence of transport limitations. The conditions used in each experiment varied between 16 - 56 bar and 60 - 100 ºC for pressure and temperature, respectively. The kinetic models were evaluated using MATLAB and EMSO software. Models using adsorption of hydrogen and organic molecules on the same type of site fitted the data best.

Documentos Relacionados

• Low metal loading catalysts used for the selective hydrogenation of styrene
• Olefin hydrogenation with iron carbonyls as catalysts
• Styrene photocatalytic degradation reaction kinetics
• Selective hydrogenation of furfural on Ir/TiO2 catalysts
• Transition metal-based bimetallic catalysts for the chemoselective hydrogenation of furfuraldehyde