Influencia do teor de titanio no torneamento do ferro fundido vermicular / Influence of the titanium content in the turning of compacted graphite iron
AUTOR(ES)
Silvia do Nascimento Rosa
DATA DE PUBLICAÇÃO
2009
RESUMO
Due to its good mechanical properties, the compacted (vermicular) graphite iron (CGI) has found a lot of applications in the automobilistic field. One of the applications is the production of high power diesel engine blocks that, due to the higher strength compared to the usual gray cast iron, allows the increase of the pressure inside the cylinder and, consequently, production of high level of energy. The result is the better fuel burning what decreases the fuel consumption and the pollutants emission levels. However, good materials properties are obtained generally through improvements in the process of the production, for example, addition of alloy elements. Thus, the goal of this work is to study the influence of the titanium content, chemical element which improves the wear resistance of the cast iron, in the turning operation performance, with carbides and ceramics tools, using two cutting speeds. The results show that the alloy with the highest titanium content generated the shortest tool life and that ceramics tools are not suitable for turning of the vermicular alloys studied. Attrition, abrasion and diffusion were the main tool wear mechanisms verified in this work
ASSUNTO(S)
ceramica machining ferro fundido powder metallurgy mechanical wear cast-iron desgaste mecanico usinagem metalurgia do po ceramics
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=000468636Documentos Relacionados
- Uma contribuição a melhoria do processo de fresamento de ferro fundido vermicular - CGI
- Study of Tapping Operation of Compacted Graphite Iron With Cemented Carbide Tool
- Three-dimensional reconstruction of compacted graphite in vermicular cast iron by manual serial sectioning
- Study of laser textured and coated cutting tools used in face milling of compacted graphite cast iron
- Internal turning for cylinder liners made of centrifuged gray cast iron