Influencia de la forma de los granos del fundente fundido CIS-F10 en la morfología y propiedades del metal depositado
AUTOR(ES)
Valdez, Marilene Álvarez, Pérez, Daniel Pérez, Gómez Pérez, Carlos R., Oria, Víctor Miguel, Quintana Puchol, Rafael, Perdomo González, Lorenzo, Crespo, Amado Cruz
FONTE
Soldagem & Inspeção
DATA DE PUBLICAÇÃO
2010-06
RESUMO
In the present paper, the shape of fused grains flux CIS-F10, granulated in air and in water, its effect on weld bead geometry and its properties were studied. Grains morphology, properties, fluidity during piling, hygroscopic behavior and the amount of air between the grains during use were analyzed. The application of these procedures showed evidence that flux granulated in air (79.2 % of spherical particles) has fluidity relatively higher (34 %), smaller shape angle (28.8 %) and a lesser intergranular air per volume (28.2 %) than the flux granulated flux in water, despite the decrease in the slope of the humectation curve. The conjugation of these aspects improve penetration (8 %) and a reduction in the width of the heat affected zone (17 %) although neither metallographic nor mechanics (< 1%) differences are shown on the welds. The slag formed in both cases is of constant geometric configuration (4 mm thickness and 25 mm width) with 0.64 flux consumption rate.
Documentos Relacionados
- Evaluación del Deterioro de los Electrodos al Incrementar el Número de Pulsos del Tiempo de Soldadura en Aceros IF y HSLA Galvanizados y la Afectación de las Propiedades Mecánicas en los Puntos de Soldadura
- 10. El ordenamiento del territorio y los procesos en la elaboración de planes reguladores en Costa Rica
- Producción y propiedades químicas del caucho en clones de Hevea según los estados fenológicos
- La medicina y los seguros en el abordaje del problema de los inválidos del trabajo en España en la primera mitad del siglo XX
- Sobre los inicios del coleccionismo y los museos de arte en la Argentina