Flexural behavior of hybrid GFRP - concrete railway sleepers

AUTOR(ES)
FONTE

Rev. IBRACON Estrut. Mater.

DATA DE PUBLICAÇÃO

23/09/2019

RESUMO

Resumo Este trabalho tem por objetivo apresentar o comportamento à flexão de vigas híbridas de GFRP (glass fiber reinforced polymer - polímero reforçado com fibra de vidro) e concreto para aplicação em dormentes ferroviários. Pretendeu-se obter dormentes com adequada resistência mecânica, não susceptíveis à corrosão, duráveis e mais leves que os dormentes em concreto protendido. Foram estudados perfis pultrudados de fibra de vidro e resina de poliéster, preenchidos com concreto de alta resistência e fibras de poliolefina nas seguintes proporções em volume: 1% e 2,5%. As vigas tinham 1,06 metros de comprimento e seção transversal de 76 mm x 76 mm x 6,2 mm, correspondendo a um modelo reduzido em escala 1 : 2,64 de um dormente de 2,80 metros de comprimento. Nos ensaios de flexão, a carga foi aplicada no centro do dormente, conforme previsto nas normas ABNT NBR 11709 (2015) e AREMA (2016). Durante os ensaios foram medidas a carga aplicada, a flecha e as deformações longitudinais de tração e compressão no centro do vão. Foi analisada a influência da adição de fibras na capacidade resistente, no modo de ruptura e no módulo de elasticidade à flexão das vigas híbridas. Por fim, o desempenho do dormente híbrido foi comparado ao do dormente monobloco em concreto protendido. Os resultados obtidos foram satisfatórios, indicando que o dormente híbrido proposto é uma alternativa viável construtivamente e tecnicamente.Abstract This paper aims to present the flexural behavior of hybrid GFRP (glass fiber reinforced polymer) concrete beams as sleepers to railway application. It was tried to obtain sleepers with adequate mechanical resistance, not susceptible to corrosion, durable and lighter than the sleepers in prestressed concrete. Pultruded fiberglass and polyester resin profiles were filled with high strength concrete and polyolefin fiber in the following proportions by volume: 1% and 2.5%. The beams were 1.06 meters long and had a 76 mm x 76 mm x 6 mm cross section, corresponding to a reduced model in a 1: 2.64 scale of a 2.80 meters long sleeper. In the bending tests, the load was applied at the center of the sleeper, as provided in the Brazilian standard NBR 11709 (2015) and American standard AREMA (2016). During the tests the applied load, the vertical deflection and the longitudinal tensile and compression deformations were measured in the center of the span. The influence of fiber addition on the strength, rupture mode and flexural modulus of elasticity of the hybrid beams was analyzed. Finally, the hybrid sleeper performance was compared to that of the prestressed concrete monoblock sleeper. The results obtained were satisfactory, indicating that the proposed hybrid sleeper is a constructively and technically feasible alternative.

Documentos Relacionados