EXPERIMENTAL STUDY OF MECHANISMS OF SAND PRODUCTION USING X-RAY COMPUTERIZED TOMOGRAPHY / ESTUDO EXPERIMENTAL DOS MECANISMOS DE PRODUÇÃO DE AREIA EMPREGANDO TOMOGRAFIA COMPUTADORIZADA DE RAIOS-X

AUTOR(ES)
DATA DE PUBLICAÇÃO

2004

RESUMO

During productive phase of the well, manytimes there is simultaneous production of the solid particles detached from matrix of the reservoir rock. This phenomenon receive the name of the sand production. In this case stress and flow conditions around of the well are fundamental factors for deflagration of the process. Stress concentration in the wall of the well lead to the loss of cohesion between grains arising, consequently, a granular material region susceptible for dragging by seepage forces derived from fluid flow. The objective of this work was to perform sand production tests in Rio Bonito and synthetic sandstone samples using real-time X-Ray Computerized Tomography. The tests investigated the initial and the evolution of failure at the cavity wall of samples. These are initial stages of the sand production process. The analysis of the CT-scans obtained during tests allowed the visualization of breakouts and collapses of the wells. From studies more details were possible estimate the sand production and produce 3-D images of the propagation of the failure.

ASSUNTO(S)

producao de areia mecanismo de ruptura sand production failure mechanism

Documentos Relacionados