Experimental Studies of Dynamic Behavior of TiNi Alloy Thin Circular Plate subjected to Transversal Impact
AUTOR(ES)
Shitang, Cui, Bo, Wang, Zhiping, Tang, Ke, Zhang
FONTE
Lat. Am. j. solids struct.
DATA DE PUBLICAÇÃO
2016-12
RESUMO
Abstract Here goes the abstract. For instance, one can write that this work The experimental research of thin circular plate of pseudo-elastic TiNi alloy under fixed supports and transversal impact loading was conducted through using the modified apparatus of Split Hopkinson Pressure Bar. The experiment results of pseudo-elastic TiNi alloy was compared with that of A3 steel. The nature of dynamic mechanical response of the structure in spatio-temporal scale, including the propagation of flexible wave in the plate, evolution of transformation zones and full-field out of plane displacement were derived. The results show that transformation zones and transformation hinge may generate near the center of the plate (about 5mm) because of two-dimensional diffusion effect of the circular plate under impact loading. The transformation hinge disappears after unloading; however, the A3 steel plate has residual deformation obviously. The impact response of TiNi alloy thin circular plate is dominated by the thermo-elastic martensite phase transformation and inverse transformation, which differs from the conventional elastic-plastic transformation mechanism.
Documentos Relacionados
- Electro-thermomechanical characterization of Ti-Ni shape memory alloy thin wires
- Experimental and Numerical Investigation of the Dynamic Behavior of Clamped Thin Panel Subjected to Underwater Impulsive Loading
- The Electrochemical Behavior of the NiTi Alloy in Different Simulated Body Fluids
- Effect of Spun Velocities and Composition on the R‒phase and Thermomechanical Behavior in Ti‒Ni Ribbons Electrically Heated
- Crystallization Behavior of Amorphous Ti51.1Cu38.9Ni10.0 Alloy